Tensile Testing, second edition by JR Davis PDF free download

JR Davis Tensile Testing, second edition PDF, was published in 2004 and uploaded for 200-level Engineering students of Federal University of Technology, Owerri (FUTO), offering ENG208 course. This ebook can be downloaded for FREE online on this page.

Tensile Testing, second edition ebook can be used to learn Tensile Testing, Stress-Strain Curve, stress, strain, Ductility, Anisotropy, Tensile Loads, Uniaxial Tensile Testing, Tensile Testing Equipment, Strain Sensors, Gripping Techniques, Environmental Chambers, Product Design, Hardness-Strength Correlation, elastic modulus, mechanical testing, Sheet Formability, Formability Tests, Plane-Strain Tensile Testing, Anelasticity, Proportional Limit, damping, Fracture Characterization, Yield Point, Elastomers, plastic, ceramic, ceramic-matrix, Fiber-Reinforced Composites, High-Strain Rates, Hot Tensile Testing, temperature control, High Strain Rate Tensile Testing, Conventional Load Frames, Expanding Ring Test, Flyer Plate Loading, Short Duration Pulse Loading, Split-Hopkinson Pressure Bar Technique, Rotating Wheel Test.

Technical Details
Updated at:
Size: 3.54 MB
Number of points needed for download: 43
Number of downloads: 64

Books related to Tensile Testing, second edition

Strength of Material, Second Edition

Author: SS Rattan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Simple stress, simple strain, Shear stress, Saint-Venant's principle, Stress, strain, Modulus of elasticity, Modulus of Rigidity, Bar elongation, Superposition principle, Tapering section Bars, Elongation due to self-weight, Uniform strength column, Statically indeterminate systems, Temperature stresses, Shrinking on, Strain analysis, Tensile test diagram, Elastic constants, Three-Dimensional stress systems, Compound stress, compound stress, Principal stresses, Maximum shear stresses, Mohr's Stress cycle, Three coplanar stress, Ellipse of Stress, Strain Analysis, Principal Strain, Principal shear strain, Mohr's Strain cycle, Strain Energy, Shear force, Bending moment, Supports types, Bending stress in beams, Simple bending theory, Moment of inertia, Flitched beams, composite beams, Unsymmetrical bending, Ellipse of inertia, Shear stress in beams, Shear stress variation, Built-up beams, Shear centre, Deflection, Beam differential equation, Deflection at a point, Macaulay's method, Moment-Area method, Strain energy due to bending, Castigliano's First theorem, Deflection by castigliano's Theorem, Impact loading on beams, conjugate beam method, Betti's reciprocal deflections theorem, Maxwell's Reciprocal Deflection theorem, Fixed beams, Continuous beams, Fixidity Effects, Clapeyron's three moment equation, Torsion, Springs, Columns, Struts, Failure Theories, Plastic bending, Plane frame structures, Materials properties, Materials testing, Tensile testing, Compression testing, Torsion testing, Hardness testing, Impact testing, Fatigue testing

Design of Structural Elements

Author: WMC McKenzie

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3307

Topics: Structural elements design, Structural Analysis Techniques, Shear Force, Bending moment, Shear force diagram, Bending moment diagram, Deflection of Beams, Elastic Shear stress distribution, Elastic Bending stress distribution, Transformed sections, Moment distribution, Bending stiffness, Rotational Stiffness, Carry-over moment, Pinned End, Free Moments, Fixed bending moments, Distribution Factors, Design Philosophies, Permissible stress Design, Load Factor Design, Limit State Design, Design codes, Eurocodes, National Annex, Structural Loading, Dead loads, Imposed loads, Imposed roof loads, Floor load distribution, Load distribution, Structural Instability, Overall Stability, Robustness, Reinforced concrete Element's Design, Structural Steelwork Elements' Design, Structural Timber Elements' Design.

The Science and Engineering of Materials ,Seventh Edition

Author: Donald Askeland, Wendelin Wright

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

The science and engineering of materials Instructors‘ Solution Manual, Fourth Edition

Author: Frank Askeland, Pradeep Phulé, Gregory Lea

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

Applied Strength of Materials, 6th Edition

Author: Robert Mott, Joseph Untener

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Direct Normal stress, stress, strain, Direct shear stress, Screw Threads, Experimental stress analysis, Computational stress analysis, Fundamental of statics, Materials design properties, Properties of steel, Properties of Cast Iron, Properties of Aluminum, Wood, Concrete, Plastics, Composites, Direct stress, Deformation, Computing design stress, Thermal stress, Bearing stress, Design bearing stress, Twisting, Elastic Torsional Deformation, Torsion, Beam loading, Beams supports, Beam types, Supports reactions, Centroids, Complex shapes centroid, Radius of Gyration, section modulus, Flexure formula, General shear formula, Special shear formulas, Shear flow, Beams deflection, combined stress, Columns, Slenderness Ratio, Buckling formula, Pressure vessels, Bolted connections design, Rivet joints, Eccentrically loaded riveted joints, Eccentrically loaded Bolted joints

Materials Science and Engineering An Introduction,10th edition

Author: William Callister, David Rethwish

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

Materials Science and Engineering, An Introduction ,8th Edition Solution Manual

Author: William Callister

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

Material Science

Author: SL Kakani

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Atomic Structure, Electronic Configuration, Crystal Geometry, Crystal Structure, Crystal Defects, bond, electron theory, Photoelectric Effect, diffusion, mechanical test, alloy, phase diagram, phase transformation, heat treatment, deformation, oxidation, corrosion, thermal properties, optical properties, electrical properties, magnetic properties, semiconductors, superconductivity, polymers, elastomers, organic materials, composites, nanostructure, spintronics, crystal, whiskers, unit cell, Co-ordination Number, crystal Imperfections, Anisotropy, Frank-Read Source, Crystal Growth, bond, Drude-Lorentz Theory, Metallic Bonding, . Fermi-Dirac, Sommerfield Free-Electron Theory, Brillouin Zones, Energy Bands, Resistivity, Conductivity, Thermoelectricity, Einstein’s Photoelectric Equation, Photoelectric Cell, Fick’s Laws, Surface Diffusion, Atomic Model, Mechanical Tests, Hume-Rothery’s Rules, Lever Rule, Annealing, Mass Effect, Pyrometers, Elastic Deformation, Plastic Deformation, Twinning, Work Hardening, Strain Hardening, Season Cracking

Properties and strength Of Materials

Author: Muhannad Zedan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: strength Of Materials, Simple stress, simple strain, Elastic materials, Hooke's law, Modulus of elasticity, Young's modulus, Brittle materials, Poisson's ratio, Shear stress, Modulus of rigidity, Double shear, Temperature stresses, Compound bar, Cantilever beams, Simple beams, Shear force, bending moment, Shear force diagram, bending moment diagram, Torsion, Crystalline structure, Metals crystalline structure, Atomic bonding, crystal structure, Body-centered cubic structure, Face-centered cubic structure, Hexagonal close-packed structure, grain structure, grain boundary, polymorphism, Slope of beams, deflection of beams, Fatigue, creep, Fracture, Creep test, Fracture mechanics, Linear fracture mechanics, Griffith's fracture criterion

Reinforced Concrete Design To Eurocode 2

Author: Bill Mosley, John Bungey, Ray Hulse

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3307

Topics: Reinforced Concrete Design, Design processes, composite action, stress-strain relations, shrinkage, thermal movement, creep, materials specification, Limit state design, Characteristics material strengths, Combination of actions, Load combinations, Beams analysis, Frames Analysis, Shear wall structures resisting horizontal loads, Moments redistribution, Rectangular-parabolic stress block, Triangular stress block, Shear, bond, Torsion, Anchorage bond, span-effective depth ratio, deflection calculation, flexural cracking, Thermal cracking, Shrinkage cracking, Reinforced concrete beams design, Reinforced concrete slabs design, Column design, column classification, slender column design, Foundations design, Retaining walls design, Prestressed concrete, Water-retaining structures, composite construction, Footings, Reinforcement details, Shear connector design

High pressure vessels

Author: Donald Fryer, John Harvey

School: University of Ilorin

Department: Engineering

Course Code: MEE511

Topics: High Pressure Vessels, stress, deflection, Poisson's Ratio, Material Failure, Material Tensile Tests, Brittle Fracture, Design Methodology, Cyclic Service Influence, Endurance Limit Philosophy, Material Quality, toughness, Crack Initiation, Crack Growth, Cumulative Damage, Special High Pressure Considerations, High Pressure Vessel Design Construction, High Pressure Vessel Closures, Stress Concentration Effects, Hazard, Safety, Analysis Techniques

Concrete Technology Theory and Practice, Multicolour Edition

Author: MS Shetty

School: Bayero University, Kano

Department: Engineering

Course Code: CIV5307

Topics: Concrete technology, Cements, Modern cements history, Portland cement manufacturing, Portland cement wet process manufacturing, Portland cement dry process manufacturing, Cement chemical composition, Cements hydration, Heat of hydration, Calcium silicate hydrates, Calcium hydroxide, calcium aluminate hydrates, hydrated cements structure, Water requirement for hydration, Cement types, ASTM cements classification, Ordinary Portland cement, Rapid hardened cement, Extra rapid hardening cement, Portland slag cement, Quick setting cement, super sulphated cement, low heat cement, Portland pozzolana cement, coloured cement, hydrophobic cement, masonry cement, expansive cement, Cement testing, Aggregates, aggregates testing, Aggregates form igneous rock, aggregates from sedimentary rocks, aggregates from metamorphic rock, aggregate crushing value, aggregates impact value, aggregate abrasion value, Deval attrition test, Dorry Abrasion test, Los Angeles test, modulus of elasticity, bulk density, specific gravity, Sieve analysis, Aggregates testing, Water, water qualities, Sea water for mixing concrete, Admixture, construction chemicals, Plasticizers, water reducers, Workability, Plasticizers action, Superplasticizers classification, Factors affecting workability, Superplasticizers types, Fresh concrete, Fresh concrete water content, Fresh concrete mix proportions, Aggregates sizes in fresh concrete, Aggregates shape, Surface texture, Admixture use in fresh concrete, Workability measurement, Slump test, k-slump test, aggregates grading, compacting factor test, flow test, flow table apparatus, vee bee consistometer test, setting of concrete, Manufacture of concrete process, Concrete compaction, Concrete curing, Concrete strength, Water-cement ratio, Strength gaining with age, Concrete maturity concept, Bond strength, High strength concrete, Elasticity, Creep, Shrinkage, Aggregates elastic properties, Modulus of Elasticity, Dynamic modulus of elasticity, Poison's ratio, Creep rheological representation, Creep measurement, Factors affecting creep, Aggregate influence, Mix proportion influence, Shrinkage, Plastic Shrinkage, Drying Shrinkage, Moisture movement, Autogenous Shrinkage, Carbonation shrinkage, Concrete Durability, Strength to Durability relationship, Concrete volume change, Durability definition, durability significance, Permeability, Cement paste permeability, Concrete permeability, Plastic shrinkage cracks, Settlement cracks, Thermal shrinkage, Hardened concrete testing, Concrete mix design, Special concrete, concrete methods

Principles of Chemical Engineering Processes Material and Energy Balances

Author: Nayef Ghasem, Redhouane Henda

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CHE202

Topics: Chemical Engineering Processes, Material Balance, Energy Balance, temperature measurement, temperature conversion, dimensional homogeneity, dimensionless quantities, process flow sheet, process unit, process streams, mass flow rates, volumetric rates, moles, molecular weight, stream composition, mass fraction, mole fraction, concentration, pressure measurement, pressure-sensing devices, process units, degrees of freedom analysis, process flow diagram, multiunit process flow diagram, mass balance, Stoichiometric Equation, Stoichiometric Coefficients, Stoichiometric Ratio, Limiting Reactant, Excess Reactants, Combustion Reactions, Chemical Equilibrium, Multiple-Unit Process Flowcharts, Single-Phase Systems, Multiphase Systems, Ideal Gas Equation of State, liquid density, solid density, gas density, Real Gas Relationships, Compressibility Factor, Virial Equation of State, van der Waals Equation of State, Soave–Redlich–Kwong Equation of State, Kay’s Mixing Rules, phase diagram, Vapor–Liquid Equilibrium Curve, Vapor Pressure Estimation, Clapeyron Equation, Clausius–Clapeyron Equation, Cox Chart, Antoine Equation, Partial Pressure, Dalton’s Law of Partial Pressures, Gibbs’ Phase Rule, Bubble Point, Dew Point, Critical Point, Kinetic Energy, Potential Energy, energy balance, steam turbine, heaters, coolers, compressors, Mechanical Energy Balance, Enthalpy Calculations, Constant Heat Capacity, Psychrometric Chart, Heat of Reaction, Heats of Formation, Heat of Combustion, Heat of Reaction Method, Unsteady-State Material Balance, Unsteady-State Energy Balance

Design of structural elements, 3rd Edition

Author: Chanakya Arya

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3307, CIV4204, CIV5405

Topics: Structural Design, Design Philosophy, Design Basics, Basic structural concepts, materials properties, Design loads acting on structures, Design loads acting on elements, Structural analysis, Beam design, Column design, British Standard Structural design, Beams, Slabs, Foundations, Retaining walls, Design in structural steelwork to BS5950, Iron, Steel, Design Strength, Connections Design, Design in unreinforced masonry, Design in timber to BS5268, Structural design to Eurocodes

An Introduction to Soil Mechanics

Author: Arnold Verruijt

School: University of Ilorin

Department: Engineering

Course Code: CVE422, CVE322, ABE384

Topics: grain size, particles, water, air, stress in soil, stress in a layer, Darcy's law, permeability, groundwater flow, flotation, flow net, well, stress strain relations, tangent modulus, one-dimensional compression, analytical solution, numerical solution, consolidation coefficient, creep, sheer strength, triaxial test, shear test, pore pressure, stress path, elastic stresses, deformation, boussinesq, newmark, flamant, layered soil, lateral soil, rankine, coulomb, earth pressure, sheet pile wall, limit analysis, strip footing, prandtl, bearing capacity, infinite slope, slope stability, soil exploration, model test, pile foundations

Foundations of Materials Science and Engineering, sixth edition

Author: William Smith, Javad Hashemi, Francisco Presuel-Moreno

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Atomic Structure, Atomic Bonding, Crystal structure, Amorphous Structure, Solidification, Crystalline Imperfections, Engineering Alloys, Phase Diagrams, Polymeric Materials, ceramics, Composite Materials, corrosion, light, superconductive materials, magnetic properties, biological materials, biomaterials, smart materials, bond, cubic unit cell, diffusion, alloy, metal, stress, strain, Poisson ratio, plastic deformation, gibbs phase rule, cooling curves, copper, iron, steel, cast iron, aluminum, magnesium, titanium, nickel, thermoplastic, thermost, elastomer, rubber, glass, concrete, asphalt, wood, sandwich structures, corrosion rates, metal-matrix, ceramic-matrix, galvanic cells, microelectronics, nanoelectronics, semiconductors, light, electromagnetic spectrum, laser, luminescence, optical fibers, superconducting materials, ferromagnetic, magnetic field, ferromagnetism, tendon, ligament, articular cartilage

A Textbook of Mechatronics

Author: RK Rajput

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MCE202

Topics: Mechatronics, control systems, microcontroller, electronic devices, semiconductor, diode, transistor, digital electronics, sensors, transducers, strain gauges, load cells, proximity sensors, light sensors, digital optical encoder, signal conditioning, amplification, amplifier, optical amplifier, data acquisition, analog-to-digital converter, digital-to-analog converter, digital signal transmission, microprocessors, microprocessor systems, Intel 8085 microprocessor, system models, mechanical system building blocks, electrical system building blocks, fluid system building blocks, thermal system building blocks, controllers, PID controllers, digital controllers, adaptive control system, programmable logic controllers, actuators, mechanical actuators, electrical actuators, DC motors, single phase motors, three phase induction motors, synchronous motors, hydraulic actuators, pumps, pressure regulator, hydraulic valves, linear actuators, rotary actuators, pneumatic actuators, mechatronic systems, embedded systems, CNC machines, CAD, CAM, Machine structure, drives, spindle, spindle bearings, swarf removal

Prestressed Concrete A Fundamental Approach, Fifth edition

Author: Edward Nawy

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE509

Topics: fiber stress, stress-strain curve of concrete, creep, shrinkage, nonprestressing reinforcement, ACI Maximum permissible stress, AASHTO maximum permissible stress, circular prestressing, elastic shortening of concrete, steel stress relaxation, creep loss, shrinkage loss, anchorage-seating loss, service-load design, composite beam, ultimate-strength flexural design, shear strength, torsional strength, web-shear reinforcement, dowel reinforcement, torsional behavior, indeterminate frame, indeterminate portal, camber, deflection, crack control, prestressed compression, tension member, LRFD, seismic shear

Power System Engineering Planning, Design, and Operation of Power Systems and Equipment ,2nd edition

Author: Juergen Schlabbach, Karl-Heinz Rofalski

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PSE513

Topics: Power System Engineering, Power System Engineering planning, Power System Engineering design, power system load, load forecast, Low-Voltage Systems, power system planning principles, power system planning criteria, loss evaluation, energy losses, power losses, power system topology, Busbar Arrangements, Double Busbar Arrangement, transformers, Thermal Permissible Loading, cable systems, Permissible Current, overload lines, Flexible AC Transmission Systems, Parallel Compensation of Lines, Serial Compensation of Lines, Phase-Shifting Equipment, HVDC-Transmission, Converter Stations, Breakers, Reactors, Electrodes, Load-Flow Calculation, Short-Circuit Current Calculation, faults, disturbances, Overcurrent Protection, Impedance Protection, Differential Protection of Lines, Ground-Fault Protection, Buchholz Protection, Overvoltages, Insulation Coordination, Slow-Front Overvoltages, Fast-Front Overvoltages, Neutral Earthing, Residual Current Compensation

Engineering materials

Author: AT Oyelami

School: Federal University of Agriculture, Abeokuta

Department: Engineering

Course Code: MCE203

Topics: Engineering materials, metals, ceramic, glasses, polymers, elastomers, atomic structure, atomic bonding, Bohr theory, Quantum Numbers, Wave-Mechanical Model, Crystal Structure, crystal defect, semiconductors, electrical conduction, Intrinsic Semiconduction, Extrinsic Semiconduction, Hot-working Processes, Hot-rolling, forging, drop-forging, Hot-pressing, extrusion, Cold-pressing, Deep-drawing, coining, spinning, Annealing, Normalising, Hardening, Case Hardening, Carburizing, Nitriding, Flame Hardening, Cyaniding, tempering

Past Questions related to Tensile Testing, second edition

Composites

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME519

Topics: Composites, bimetal, alloys, composite materials, dispersion-strengthened composite material, wood plastic composites, tensile loadings, compressive loadings, fiber reinforced composites, modulus of elasticity, bimetals, laminated glass, hand lay-up processing technique, pultrusion processing technique

Mechanical properties of materials

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME413

Topics: Materials mechanical properties, true strain, tensile test, true stress-strain curve, tensile uniaxial flow stress, uniform plastic deformation, ultimate tesnile strength

Introduction to engineering materials 2

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: Elasticity, hardness, resistance, engineering materials, plasticity, density, ductility, electrolytes, electrochemical cell, magnetic field, Paramagnetism, diamagnetism, anti ferromagnetism, ferrimagnetism, semi conductors, polystyrene, commodity plastic, steel, tin, copper, axial stress, axial strain, corrosion

INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: mechanical properties, Mechanical testing, wood, corrosion, plastic, ceramic, alloy

Petroleum rock mechanics

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET415

Topics: Petroleum rock mechanics, isotropic rock, anisotropic rock, rock dynamic properties, shear modulus, young's modulus, elastic region, yield point, chip hold down, uniaxial compressive strength, ductile region, brittle region, shear failure, hydro pressure, abnormal formation pore pressure, overburden pressure

Engineering technology of elastomers

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE507

Topics: Elastomers engineering technology, peptizing agents, black fillers, non black fillers, natural rubber latex, natural rubber grades, rubber processing techniques, tyre

Strength of materials

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: proportional limit, elastic limit, deformation, strain, tensile stress, failure strength, Mohr's circle

Materials processing

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME302

Topics: Materials processing, casting, pure metal solidification, Scheil equation, zone refining, engineering stress strain curve, true stress strain curve, cold working operation, hot working operations, vapour deposition

INTRODUCTION TO WOODWORK DESIGN

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE335

Topics: seasoning, dowels, drift, bolt, load, stress, fibre stress, proportional limit, modulus of elasticity, beam

STRENGTH OF MATERIALS

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: force, load, stress, strain, elasticity, plasticity, elastic limit, beam, modulus of resilience, column, cantilever

Petroleum production engineering 1

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET306

Topics: Petroleum production engineering, critical point, cricondentherm, cricodenbar, retrograde condensation, dry gas reservoir, wet gas reservoir, bubble point curve, dew point curve, Gas condensate, Standing-Katz solutions, constant composition expansion test, differential liberation experiment, isothermal compressibility, Bubble point pressure, gas solubility, crude oil viscosity, crude oil density, bottomhole completion, Darcy's law, oil production

Man made fibre production

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE314

Topics: Man made fibre production, polymer testing, polymer analysis, elastic limit region, plastic region, breaking point region, fabric air permeability, fabrics water repellency, fabrics absorbency, toughness, ultimate tensile strength, tear resistance, colour fastness, impact strength test

Analysis and resting of polmeric and textiles

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE322

Topics: Polymer analysis, polymer testing, plastic region, breaking point region, elastic limit region, fabrics water repellency, fabrics absorbency, fabrics air permeability, toughness, ultimate tensile strength, tear resistance, impact strength test

Reservoir engineering 2

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET403

Topics: Reservoir engineering, bubble point curve, critical point, dew point curve, cricondentherm, cricondenbar, reservoir fluid sampling, oil flow rate, pressure profile

Tests related to Tensile Testing, second edition

Physics (JAMB)

School: WAEC, JAMB & POST UTME

Department:

Course Code: JAMB

Topics: Physics, JAMB, Friction, work, force, motion, speed, velocity, energy, hydraulic press, relative density, hydrometer, gas law, sound wave, wave, light, mirror,capacitor, electricity, pressure

Novrazbb Yotjob distinctquote yourowndir muttcat scholarship carlesto newsfunt