Download INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018 - ENG208 Past Question PDF

You will find INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018 past question PDF which can be downloaded for FREE on this page. INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018 is useful when preparing for ENG208 course exams.

INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018 past question for the year 2018 examines 200-level Engineering students of FUTO, offering ENG208 course on their knowledge of mechanical properties, Mechanical testing, wood, corrosion, plastic, ceramic, alloy

Technical Details
Updated at:
Size: 3.82 MB
Number of points needed for download: 33
Number of downloads: 22

Past Questions related to INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018

Industrial alloys

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MTE524

Topics: Industrial alloys, iron cementite phase diagram, crystallization, recrystallization, industrial recrystallization, eutectic reaction, ferrous alloy, non-ferrous alloy, steel, carbon steel, low alloy, high allow, high-speed steels, Muntz metal, pewter, Elinvar

Introduction to wood work design

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE335

Topics: Wood work design, timber flooring system, timber floor joists, wood, timber defects, timber seasoning, wood seasoning, joint allowable load

Mechanical properties of materials

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME413

Topics: Materials mechanical properties, true strain, tensile test, true stress-strain curve, tensile uniaxial flow stress, uniform plastic deformation, ultimate tesnile strength

Workshop practice 4

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG206

Topics: workshop practice, wood working machine, jigsaw, mortise, wood lathe, clamp, ceramics, adhesive, wax, resins, routing, wood joinery, wood, wood air seasoning, boring tools, drilling tools, wood work tools, milling machine, shaping machine

Introduction to engineering materials 2

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: Elasticity, hardness, resistance, engineering materials, plasticity, density, ductility, electrolytes, electrochemical cell, magnetic field, Paramagnetism, diamagnetism, anti ferromagnetism, ferrimagnetism, semi conductors, polystyrene, commodity plastic, steel, tin, copper, axial stress, axial strain, corrosion

Pulp and paper technology

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE523

Topics: Wood, wood applications, wood classes, wood chemistry, paper manufacture, wood bonding, interlocking action, pulp technology, paper production processes

Corrosion science and engineering

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME403

Topics: Corrosion science, corrosion engineering, metal tube wall erosion corrosion, activation polarization, concentration polarization, anodic inhibitor, inhibition efficiency

PRINCIPLES &PROCESSING OF CERAMICS

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME311

Topics: capacitor, porcelain, phase, eutetic, ceramic, plaster-of-Paris

MECHANICAL PROPERTIES OF MATERIAL

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME413

Topics: metal, strain, stress, hardness, extrusion, extrudant, tensile strength, engineering material

PHYSICAL METALLURGY 1

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME206

Topics: METALLURGY, phase rule, alloy, ceramic, glass, steel, eutectoid, peritectoid, stress, hardening, strengthening

Civil engineering materials

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE204

Topics: Civil engineering materials, concrete, concrete setting time, concrete segregation, fresh concrete, hardened concrete, plastic concrete, fresh concrete breeding, compressive strength, admixtures, batching, curing, workability, steel, steel corrosion, coal tar, asphalt

Composites

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME519

Topics: Composites, bimetal, alloys, composite materials, dispersion-strengthened composite material, wood plastic composites, tensile loadings, compressive loadings, fiber reinforced composites, modulus of elasticity, bimetals, laminated glass, hand lay-up processing technique, pultrusion processing technique

Man made fibre production

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE314

Topics: Man made fibre production, polymer testing, polymer analysis, elastic limit region, plastic region, breaking point region, fabric air permeability, fabrics water repellency, fabrics absorbency, toughness, ultimate tensile strength, tear resistance, colour fastness, impact strength test

Analysis and resting of polmeric and textiles

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE322

Topics: Polymer analysis, polymer testing, plastic region, breaking point region, elastic limit region, fabrics water repellency, fabrics absorbency, fabrics air permeability, toughness, ultimate tensile strength, tear resistance, impact strength test

Books related to INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018

Building Materials, Revised Third Edition

Author: SK Duggal

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3302

Topics: Building Materials Principal Properties, Structural Clay Products, Brick's Classification, Brick's Testing, Clay Tiles, Terracotta, Porcelain, stoneware, Earthenware, Glazing, Rocks, Stones, Rock-forming minerals, Rock's Classification, Stone Durability, Stones Application, Stone seasoning, wood, wood Products, Trees Classification, Trees growth, Timber Preservation, Timber testing, Timber Structure, Timber's Fire Resistance, Properties of wood, wood products, wood-products applications, Material for making concrete, Cements, Portland cement, Raw materials chemical composition, Cement Hydration, Rate of Hydration, Hydration water requirement, Cements manufacturing, Cements testing, Cement Types, Cements storage, Aggregates, Aggregates classification, Aggregates characteristics, Deleterious Materials, Organic Impurities, Soundness, Aggregates Thermal Properties, Fine Aggregates, Coarse Aggregates, Cinder Aggregates, Mixing water Quality, Effect of mixing water from different source, Water for washing aggregates, Curing water, Lime, Limestone's Impurities, Limestone's Storage, Lime Vs Cement, Pozzolanas, Concrete, water-cement ratio, workability, Maturity, Defects, Re-vibration, Rheology, Non-destructive testing, Admixture for concrete, Concrete Mix design, Building Mortars, Ferrous Metals, Non-Ferrous Metals, Ceramic Materials, Polymeric Materials, Paints, Enamels, Varnishes, Tar, Bitumen, Asphalt, Gypsum, Special Cements, Cement Concretes, Adhesives, Water proofing materials, Fiber, Geosynthetics, Composite Materials, Smart materials, Asbestos, Thermoc0ol, Heat Insulating Materials, Sound Insulating Materials.

Foundations of Materials Science and Engineering, sixth edition

Author: William Smith, Javad Hashemi, Francisco Presuel-Moreno

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Atomic Structure, Atomic Bonding, Crystal structure, Amorphous Structure, Solidification, Crystalline Imperfections, Engineering Alloys, Phase Diagrams, Polymeric Materials, ceramics, Composite Materials, corrosion, light, superconductive materials, magnetic properties, biological materials, biomaterials, smart materials, bond, cubic unit cell, diffusion, alloy, metal, stress, strain, Poisson ratio, plastic deformation, gibbs phase rule, cooling curves, copper, iron, steel, cast iron, aluminum, magnesium, titanium, nickel, thermoplastic, thermost, elastomer, rubber, glass, concrete, asphalt, wood, sandwich structures, corrosion rates, metal-matrix, ceramic-matrix, galvanic cells, microelectronics, nanoelectronics, semiconductors, light, electromagnetic spectrum, laser, luminescence, optical fibers, superconducting materials, ferromagnetic, magnetic field, ferromagnetism, tendon, ligament, articular cartilage

Tensile Testing, second edition

Author: JR Davis

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: Tensile Testing, Stress-Strain Curve, stress, strain, Ductility, Anisotropy, Tensile Loads, Uniaxial Tensile Testing, Tensile Testing Equipment, Strain Sensors, Gripping Techniques, Environmental Chambers, Product Design, Hardness-Strength Correlation, elastic modulus, mechanical testing, Sheet Formability, Formability Tests, Plane-Strain Tensile Testing, Anelasticity, Proportional Limit, damping, Fracture Characterization, Yield Point, Elastomers, plastic, ceramic, ceramic-matrix, Fiber-Reinforced Composites, High-Strain Rates, Hot Tensile Testing, temperature control, High Strain Rate Tensile Testing, Conventional Load Frames, Expanding Ring Test, Flyer Plate Loading, Short Duration Pulse Loading, Split-Hopkinson Pressure Bar Technique, Rotating Wheel Test

Materials Science and Engineering An Introduction,10th edition

Author: William Callister, David Rethwish

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

Materials Science and Engineering, An Introduction ,8th Edition Solution Manual

Author: William Callister

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

Material Science

Author: SL Kakani

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Atomic Structure, Electronic Configuration, Crystal Geometry, Crystal Structure, Crystal Defects, bond, electron theory, Photoelectric Effect, diffusion, mechanical test, alloy, phase diagram, phase transformation, heat treatment, deformation, oxidation, corrosion, thermal properties, optical properties, electrical properties, magnetic properties, semiconductors, superconductivity, polymers, elastomers, organic materials, composites, nanostructure, spintronics, crystal, whiskers, unit cell, Co-ordination Number, crystal Imperfections, Anisotropy, Frank-Read Source, Crystal Growth, bond, Drude-Lorentz Theory, Metallic Bonding, . Fermi-Dirac, Sommerfield Free-Electron Theory, Brillouin Zones, Energy Bands, Resistivity, Conductivity, Thermoelectricity, Einstein’s Photoelectric Equation, Photoelectric Cell, Fick’s Laws, Surface Diffusion, Atomic Model, Mechanical Tests, Hume-Rothery’s Rules, Lever Rule, Annealing, Mass Effect, Pyrometers, Elastic Deformation, Plastic Deformation, Twinning, Work Hardening, Strain Hardening, Season Cracking

Introduction to wood work

Author: unknown

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: INTRODUCTION TO WOOD WORK

Topics: wood work, civil

Corrosion

Author: Abdulwahab

School: Air Force Institute of Technology

Department: Engineering

Course Code: GET212

Topics: corrosion, types of corrosion, corrosion control, crystalline materials, space lattice, unit cells, metal solidification, cooling curves, Electrochemical corrosion, metallic solid solution, Substitutional solid solutions, Interstitial solid solutions, binary isomorphous alloy systems

Materials for engineering ,Third edition

Author: John Martin

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: engineering materials, mechanical properties, Metals, alloys, Glass, ceramics, Organic polymeric materials, Composite materials, Crystal structure, Microstructure, tensile test, bend testing, Hardness testing, Fracture toughness testing, Glass ceramics, Cement, concrete, Bulk metallic glasses, Cellular solids

INTRODUCTION TO ENGINEERING MATERIALS 2 LECTURE DIGEST

Author: ENGR U MARK

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: alloys, tensile strength, conductivity, resistivity, luminescence, semi conductors, corrosion and corrosion control, plastics, composite materials

The Science and Engineering of Materials ,Seventh Edition

Author: Donald Askeland, Wendelin Wright

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

The science and engineering of materials Instructors‘ Solution Manual, Fourth Edition

Author: Frank Askeland, Pradeep Phulé, Gregory Lea

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

All Lecture notes on material science

Author: EGR201

School: University of Nigeria, Nsukka

Department: Engineering

Course Code: EGR201

Topics: material science, corrosion, forming process, sheet metalworking, metal forming, mechanical porperties, mechanical porperty testing, hardness test, Brinell hardness number, Vickers hardness number, diamond pyramid hardness, Rockwell hardness testing, tension test, fatique testing, creep testing, tensil test, radiography, magnetic particle inspection, magnetic particle crack detection, dye penetrant testing, ultrasonic flaw detection, eddy current, electro-magnetic methods, eddy current testing, non-destructive testing methods, magnetic properties

Manufacturing Engineering And Technology, Seventh Edition

Author: Steven Schmid, Serope Kalpakjian

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MCE304

Topics: structure of metals, mechanical behavior of metals, manufacturing properties of metals, metal alloys, heat treatment, ferrous metals, alloy, Nonferrous metals, alloys, polymers, ceramic, glass, graphite, diamond, nano materials, composite materials, metal-casting processes, metal-casting equipment, metal casting, metal-rolling, metal-forging, metal extrusion, drawing processes, sheet-metal forming processes, powder metal, superconductors, plastics, rapid-prototyping processes, machining, cutting-tool materials, cutting fluids, machining processes, machining centers, machine-tool structures, machining economics, abrasive finishing, finishing operations, micromanufacturing, microelectronics devices, solid-welding processes, brazing, soldering, adhesive-bonding, mechanical fastening, surface technology, engineering metrology, instrumentation, quality assurance, computer-integrated manufacturing, computer-aided manufacturing

Concrete Technology Theory and Practice, Multicolour Edition

Author: MS Shetty

School: Bayero University, Kano

Department: Engineering

Course Code: CIV5307

Topics: Concrete technology, Cements, Modern cements history, Portland cement manufacturing, Portland cement wet process manufacturing, Portland cement dry process manufacturing, Cement chemical composition, Cements hydration, Heat of hydration, Calcium silicate hydrates, Calcium hydroxide, calcium aluminate hydrates, hydrated cements structure, Water requirement for hydration, Cement types, ASTM cements classification, Ordinary Portland cement, Rapid hardened cement, Extra rapid hardening cement, Portland slag cement, Quick setting cement, super sulphated cement, low heat cement, Portland pozzolana cement, coloured cement, hydrophobic cement, masonry cement, expansive cement, Cement testing, Aggregates, aggregates testing, Aggregates form igneous rock, aggregates from sedimentary rocks, aggregates from metamorphic rock, aggregate crushing value, aggregates impact value, aggregate abrasion value, Deval attrition test, Dorry Abrasion test, Los Angeles test, modulus of elasticity, bulk density, specific gravity, Sieve analysis, Aggregates testing, Water, water qualities, Sea water for mixing concrete, Admixture, construction chemicals, Plasticizers, water reducers, Workability, Plasticizers action, Superplasticizers classification, Factors affecting workability, Superplasticizers types, Fresh concrete, Fresh concrete water content, Fresh concrete mix proportions, Aggregates sizes in fresh concrete, Aggregates shape, Surface texture, Admixture use in fresh concrete, Workability measurement, Slump test, k-slump test, aggregates grading, compacting factor test, flow test, flow table apparatus, vee bee consistometer test, setting of concrete, Manufacture of concrete process, Concrete compaction, Concrete curing, Concrete strength, Water-cement ratio, Strength gaining with age, Concrete maturity concept, Bond strength, High strength concrete, Elasticity, Creep, Shrinkage, Aggregates elastic properties, Modulus of Elasticity, Dynamic modulus of elasticity, Poison's ratio, Creep rheological representation, Creep measurement, Factors affecting creep, Aggregate influence, Mix proportion influence, Shrinkage, Plastic Shrinkage, Drying Shrinkage, Moisture movement, Autogenous Shrinkage, Carbonation shrinkage, Concrete Durability, Strength to Durability relationship, Concrete volume change, Durability definition, durability significance, Permeability, Cement paste permeability, Concrete permeability, Plastic shrinkage cracks, Settlement cracks, Thermal shrinkage, Hardened concrete testing, Concrete mix design, Special concrete, concrete methods

Strength of Material, Second Edition

Author: SS Rattan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Simple stress, simple strain, Shear stress, Saint-Venant's principle, Stress, strain, Modulus of elasticity, Modulus of Rigidity, Bar elongation, Superposition principle, Tapering section Bars, Elongation due to self-weight, Uniform strength column, Statically indeterminate systems, Temperature stresses, Shrinking on, Strain analysis, Tensile test diagram, Elastic constants, Three-Dimensional stress systems, Compound stress, compound stress, Principal stresses, Maximum shear stresses, Mohr's Stress cycle, Three coplanar stress, Ellipse of Stress, Strain Analysis, Principal Strain, Principal shear strain, Mohr's Strain cycle, Strain Energy, Shear force, Bending moment, Supports types, Bending stress in beams, Simple bending theory, Moment of inertia, Flitched beams, composite beams, Unsymmetrical bending, Ellipse of inertia, Shear stress in beams, Shear stress variation, Built-up beams, Shear centre, Deflection, Beam differential equation, Deflection at a point, Macaulay's method, Moment-Area method, Strain energy due to bending, Castigliano's First theorem, Deflection by castigliano's Theorem, Impact loading on beams, conjugate beam method, Betti's reciprocal deflections theorem, Maxwell's Reciprocal Deflection theorem, Fixed beams, Continuous beams, Fixidity Effects, Clapeyron's three moment equation, Torsion, Springs, Columns, Struts, Failure Theories, Plastic bending, Plane frame structures, Materials properties, Materials testing, Tensile testing, Compression testing, Torsion testing, Hardness testing, Impact testing, Fatigue testing

Engineering materials 2 laboratory manual and tutorial with solutions

Author: MME

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: mechanical testing, micro structures, tensile test, hardness test, conductivity, resistivity

Material science

Author: Gaurav Tripathi

School: University of Nigeria, Nsukka

Department: Engineering

Course Code: EGR201

Topics: Materials Science, materials Engineering, Rutherford model, Bohr model, atom, De- Broglie’s atomic model, Atomic bonding, ionic bonding, covalent bonding, Secondary Bonding, metallic bonding, Fluctuating Induced Dipole Bonds, Polar Molecule-Induced Dipole Bonds, Permanent Dipole Bonds, Crystallography, crystal structures, Crystal Lattice, Bravais lattices, Metallic Crystal Structures, Polycrystalline Materials, Non-Crystalline Solids, Miller Indices, Point Defects, Mechanical Properties of Metals, Stress-Strain curve, Elastic deformation, plastic deformation, Tensile Properties, Brinell Hardness Test, Micro-hardness Test, Knoop Hardness Test, Scleroscope Hardness Test, durometer, fracture, creep, dislocation, Solid-Solution Strengthening, Microstructural Exam, Grain size determination, carbon steel, cast iron, alloy, Dielectric Materials, Dielectric strength, Intrinsic dielectric strength, Magnetic Properties, Diamagnetism, Ferromagnetism, Ferrimagnetism, Hard Magnetic Materials, Extrinsic Semiconductor, semiconductor

Automotive Engineering Lightweight, Functional and novel materials

Author: Brian cantor, Patrick Grant, Colin Johnson

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ATE403

Topics: Future Vehicles, Future Materials Technologies, Automobile Aluminum Sheet, Plastic Technology for Automotive Modules, Functional Materials, Automotive Catalysts, Magnetorheological Fluids, Impact Loading, High-Temperature Electronic Materials, Smart Materials, Light Metals, Formability of Aluminum Alloys, Ductile Magnesium, Enhancement of Crashworthiness in Cellular Structures, Compressive Properties of Cellular Metals, Heavily Deformable Al Alloy, Stainless Steel Sandwich Sheets with Fibrous Metal Cores, Processing metal, Manufacturing metal, Welding metal, Joining metal, Titanium Aluminide-Based Intermetallic Alloys, Casting Processes, Casting Simulation Tools, Damage Tolerance in Composite Structures, High-Performance Autosport Surface TreatmentsComposites

Applied Strength of Materials, 6th Edition

Author: Robert Mott, Joseph Untener

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Direct Normal stress, stress, strain, Direct shear stress, Screw Threads, Experimental stress analysis, Computational stress analysis, Fundamental of statics, Materials design properties, Properties of steel, Properties of Cast Iron, Properties of Aluminum, Wood, Concrete, Plastics, Composites, Direct stress, Deformation, Computing design stress, Thermal stress, Bearing stress, Design bearing stress, Twisting, Elastic Torsional Deformation, Torsion, Beam loading, Beams supports, Beam types, Supports reactions, Centroids, Complex shapes centroid, Radius of Gyration, section modulus, Flexure formula, General shear formula, Special shear formulas, Shear flow, Beams deflection, combined stress, Columns, Slenderness Ratio, Buckling formula, Pressure vessels, Bolted connections design, Rivet joints, Eccentrically loaded riveted joints, Eccentrically loaded Bolted joints