INTRODUCTION TO ENGINEERING MATERIALS 2 LECTURE DIGEST by ENGR U MARK PDF free download

ENGR U MARK INTRODUCTION TO ENGINEERING MATERIALS 2 LECTURE DIGEST PDF, was published in 2016 and uploaded for 200-level Engineering students of Federal University of Technology, Owerri (FUTO), offering ENG208 course. This ebook can be downloaded for FREE online on this page.

INTRODUCTION TO ENGINEERING MATERIALS 2 LECTURE DIGEST ebook can be used to learn alloys, tensile strength, conductivity, resistivity, luminescence, semi conductors, corrosion and corrosion control, plastics, composite materials.

Technical Details
Updated at:
Size: 23.1 MB
Number of points needed for download: 33
Number of downloads: 13

Books related to INTRODUCTION TO ENGINEERING MATERIALS 2 LECTURE DIGEST

Foundations of Materials Science and Engineering, sixth edition

Author: William Smith, Javad Hashemi, Francisco Presuel-Moreno

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Atomic Structure, Atomic Bonding, Crystal structure, Amorphous Structure, Solidification, Crystalline Imperfections, Engineering Alloys, Phase Diagrams, Polymeric Materials, ceramics, Composite Materials, corrosion, light, superconductive materials, magnetic properties, biological materials, biomaterials, smart materials, bond, cubic unit cell, diffusion, alloy, metal, stress, strain, Poisson ratio, plastic deformation, gibbs phase rule, cooling curves, copper, iron, steel, cast iron, aluminum, magnesium, titanium, nickel, thermoplastic, thermost, elastomer, rubber, glass, concrete, asphalt, wood, sandwich structures, corrosion rates, metal-matrix, ceramic-matrix, galvanic cells, microelectronics, nanoelectronics, semiconductors, light, electromagnetic spectrum, laser, luminescence, optical fibers, superconducting materials, ferromagnetic, magnetic field, ferromagnetism, tendon, ligament, articular cartilage

Tensile Testing, second edition

Author: JR Davis

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: Tensile Testing, Stress-Strain Curve, stress, strain, Ductility, Anisotropy, Tensile Loads, Uniaxial Tensile Testing, Tensile Testing Equipment, Strain Sensors, Gripping Techniques, Environmental Chambers, Product Design, Hardness-Strength Correlation, elastic modulus, mechanical testing, Sheet Formability, Formability Tests, Plane-Strain Tensile Testing, Anelasticity, Proportional Limit, damping, Fracture Characterization, Yield Point, Elastomers, plastic, ceramic, ceramic-matrix, Fiber-Reinforced Composites, High-Strain Rates, Hot Tensile Testing, temperature control, High Strain Rate Tensile Testing, Conventional Load Frames, Expanding Ring Test, Flyer Plate Loading, Short Duration Pulse Loading, Split-Hopkinson Pressure Bar Technique, Rotating Wheel Test

Introduction to Materials for Advanced Energy Systems

Author: Colin Tong

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MCE403

Topics: Advanced Energy Systems, Energy resource, energy system development, energy process characterization, energy calculations, energy accounting, sustainable energy development, Dynamic Mechanical Spectroscopy, nano-scale material, micro-scale material, nanoindentation, optical microscopy, electron microscopy, atom probe tomography, advanced x-ray characterization, neutron scattering, phase transformation temperatures, density, specific gravity, thermal conductivity, thermal expansion, electrical conductivity, electrical resistivity, permittivity, permeability, corrosion, oxidation, toughness, materials design, materials modeling, advanced coatings, photovoltaic materials, hybrid solar cells, thermal storage materials, phase change materials, Geothermal electricity, geothermal heat pump, wind resources, wind machinery, energy-generating systems, wind turbine, hydropower technology, ocean energy, hydrogen generation technology, fuel cells, advanced nuclear energy, fission reactors, fusion reactors, thermoelectric materials, piezoelectric materials, pyroelectric materials, magnetostrictive materials, multiferroic magnetoelectric materials, triboelectric materials, artificial photosynthesis

Materials for engineering ,Third edition

Author: John Martin

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: engineering materials, mechanical properties, Metals, alloys, Glass, ceramics, Organic polymeric materials, Composite materials, Crystal structure, Microstructure, tensile test, bend testing, Hardness testing, Fracture toughness testing, Glass ceramics, Cement, concrete, Bulk metallic glasses, Cellular solids

The Science and Engineering of Materials ,Seventh Edition

Author: Donald Askeland, Wendelin Wright

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

The science and engineering of materials Instructors‘ Solution Manual, Fourth Edition

Author: Frank Askeland, Pradeep Phulé, Gregory Lea

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

Manufacturing Engineering And Technology, Seventh Edition

Author: Steven Schmid, Serope Kalpakjian

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MCE304

Topics: structure of metals, mechanical behavior of metals, manufacturing properties of metals, metal alloys, heat treatment, ferrous metals, alloy, Nonferrous metals, alloys, polymers, ceramic, glass, graphite, diamond, nano materials, composite materials, metal-casting processes, metal-casting equipment, metal casting, metal-rolling, metal-forging, metal extrusion, drawing processes, sheet-metal forming processes, powder metal, superconductors, plastics, rapid-prototyping processes, machining, cutting-tool materials, cutting fluids, machining processes, machining centers, machine-tool structures, machining economics, abrasive finishing, finishing operations, micromanufacturing, microelectronics devices, solid-welding processes, brazing, soldering, adhesive-bonding, mechanical fastening, surface technology, engineering metrology, instrumentation, quality assurance, computer-integrated manufacturing, computer-aided manufacturing

Engineering materials 2 laboratory manual and tutorial with solutions

Author: MME

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: mechanical testing, micro structures, tensile test, hardness test, conductivity, resistivity

Automotive Engineering Lightweight, Functional and novel materials

Author: Brian cantor, Patrick Grant, Colin Johnson

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ATE403

Topics: Future Vehicles, Future Materials Technologies, Automobile Aluminum Sheet, Plastic Technology for Automotive Modules, Functional Materials, Automotive Catalysts, Magnetorheological Fluids, Impact Loading, High-Temperature Electronic Materials, Smart Materials, Light Metals, Formability of Aluminum Alloys, Ductile Magnesium, Enhancement of Crashworthiness in Cellular Structures, Compressive Properties of Cellular Metals, Heavily Deformable Al Alloy, Stainless Steel Sandwich Sheets with Fibrous Metal Cores, Processing metal, Manufacturing metal, Welding metal, Joining metal, Titanium Aluminide-Based Intermetallic Alloys, Casting Processes, Casting Simulation Tools, Damage Tolerance in Composite Structures, High-Performance Autosport Surface TreatmentsComposites

Material Science

Author: SL Kakani

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Atomic Structure, Electronic Configuration, Crystal Geometry, Crystal Structure, Crystal Defects, bond, electron theory, Photoelectric Effect, diffusion, mechanical test, alloy, phase diagram, phase transformation, heat treatment, deformation, oxidation, corrosion, thermal properties, optical properties, electrical properties, magnetic properties, semiconductors, superconductivity, polymers, elastomers, organic materials, composites, nanostructure, spintronics, crystal, whiskers, unit cell, Co-ordination Number, crystal Imperfections, Anisotropy, Frank-Read Source, Crystal Growth, bond, Drude-Lorentz Theory, Metallic Bonding, . Fermi-Dirac, Sommerfield Free-Electron Theory, Brillouin Zones, Energy Bands, Resistivity, Conductivity, Thermoelectricity, Einstein’s Photoelectric Equation, Photoelectric Cell, Fick’s Laws, Surface Diffusion, Atomic Model, Mechanical Tests, Hume-Rothery’s Rules, Lever Rule, Annealing, Mass Effect, Pyrometers, Elastic Deformation, Plastic Deformation, Twinning, Work Hardening, Strain Hardening, Season Cracking

Building Materials, Revised Third Edition

Author: SK Duggal

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3302

Topics: Building Materials Principal Properties, Structural Clay Products, Brick's Classification, Brick's Testing, Clay Tiles, Terracotta, Porcelain, stoneware, Earthenware, Glazing, Rocks, Stones, Rock-forming minerals, Rock's Classification, Stone Durability, Stones Application, Stone seasoning, wood, wood Products, Trees Classification, Trees growth, Timber Preservation, Timber testing, Timber Structure, Timber's Fire Resistance, Properties of wood, wood products, wood-products applications, Material for making concrete, Cements, Portland cement, Raw materials chemical composition, Cement Hydration, Rate of Hydration, Hydration water requirement, Cements manufacturing, Cements testing, Cement Types, Cements storage, Aggregates, Aggregates classification, Aggregates characteristics, Deleterious Materials, Organic Impurities, Soundness, Aggregates Thermal Properties, Fine Aggregates, Coarse Aggregates, Cinder Aggregates, Mixing water Quality, Effect of mixing water from different source, Water for washing aggregates, Curing water, Lime, Limestone's Impurities, Limestone's Storage, Lime Vs Cement, Pozzolanas, Concrete, water-cement ratio, workability, Maturity, Defects, Re-vibration, Rheology, Non-destructive testing, Admixture for concrete, Concrete Mix design, Building Mortars, Ferrous Metals, Non-Ferrous Metals, Ceramic Materials, Polymeric Materials, Paints, Enamels, Varnishes, Tar, Bitumen, Asphalt, Gypsum, Special Cements, Cement Concretes, Adhesives, Water proofing materials, Fiber, Geosynthetics, Composite Materials, Smart materials, Asbestos, Thermoc0ol, Heat Insulating Materials, Sound Insulating Materials.

Strength of Material, Second Edition

Author: SS Rattan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Simple stress, simple strain, Shear stress, Saint-Venant's principle, Stress, strain, Modulus of elasticity, Modulus of Rigidity, Bar elongation, Superposition principle, Tapering section Bars, Elongation due to self-weight, Uniform strength column, Statically indeterminate systems, Temperature stresses, Shrinking on, Strain analysis, Tensile test diagram, Elastic constants, Three-Dimensional stress systems, Compound stress, compound stress, Principal stresses, Maximum shear stresses, Mohr's Stress cycle, Three coplanar stress, Ellipse of Stress, Strain Analysis, Principal Strain, Principal shear strain, Mohr's Strain cycle, Strain Energy, Shear force, Bending moment, Supports types, Bending stress in beams, Simple bending theory, Moment of inertia, Flitched beams, composite beams, Unsymmetrical bending, Ellipse of inertia, Shear stress in beams, Shear stress variation, Built-up beams, Shear centre, Deflection, Beam differential equation, Deflection at a point, Macaulay's method, Moment-Area method, Strain energy due to bending, Castigliano's First theorem, Deflection by castigliano's Theorem, Impact loading on beams, conjugate beam method, Betti's reciprocal deflections theorem, Maxwell's Reciprocal Deflection theorem, Fixed beams, Continuous beams, Fixidity Effects, Clapeyron's three moment equation, Torsion, Springs, Columns, Struts, Failure Theories, Plastic bending, Plane frame structures, Materials properties, Materials testing, Tensile testing, Compression testing, Torsion testing, Hardness testing, Impact testing, Fatigue testing

Materials Science and Engineering An Introduction,10th edition

Author: William Callister, David Rethwish

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

Materials Science and Engineering, An Introduction ,8th Edition Solution Manual

Author: William Callister

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

Material science

Author: Gaurav Tripathi

School: University of Nigeria, Nsukka

Department: Engineering

Course Code: EGR201

Topics: Materials Science, materials Engineering, Rutherford model, Bohr model, atom, De- Broglie’s atomic model, Atomic bonding, ionic bonding, covalent bonding, Secondary Bonding, metallic bonding, Fluctuating Induced Dipole Bonds, Polar Molecule-Induced Dipole Bonds, Permanent Dipole Bonds, Crystallography, crystal structures, Crystal Lattice, Bravais lattices, Metallic Crystal Structures, Polycrystalline Materials, Non-Crystalline Solids, Miller Indices, Point Defects, Mechanical Properties of Metals, Stress-Strain curve, Elastic deformation, plastic deformation, Tensile Properties, Brinell Hardness Test, Micro-hardness Test, Knoop Hardness Test, Scleroscope Hardness Test, durometer, fracture, creep, dislocation, Solid-Solution Strengthening, Microstructural Exam, Grain size determination, carbon steel, cast iron, alloy, Dielectric Materials, Dielectric strength, Intrinsic dielectric strength, Magnetic Properties, Diamagnetism, Ferromagnetism, Ferrimagnetism, Hard Magnetic Materials, Extrinsic Semiconductor, semiconductor

Prestressed Concrete A Fundamental Approach, Fifth edition

Author: Edward Nawy

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE509

Topics: fiber stress, stress-strain curve of concrete, creep, shrinkage, nonprestressing reinforcement, ACI Maximum permissible stress, AASHTO maximum permissible stress, circular prestressing, elastic shortening of concrete, steel stress relaxation, creep loss, shrinkage loss, anchorage-seating loss, service-load design, composite beam, ultimate-strength flexural design, shear strength, torsional strength, web-shear reinforcement, dowel reinforcement, torsional behavior, indeterminate frame, indeterminate portal, camber, deflection, crack control, prestressed compression, tension member, LRFD, seismic shear

Strength of materials material

Author: GRANIT CHIKA

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: Tensile stress, Compressive test, Strain, deformation, force, load, shearing forces, bending moments, beam, bending stress, flexural stress, colums, torsion, Strength of materials

Corrosion

Author: Abdulwahab

School: Air Force Institute of Technology

Department: Engineering

Course Code: GET212

Topics: corrosion, types of corrosion, corrosion control, crystalline materials, space lattice, unit cells, metal solidification, cooling curves, Electrochemical corrosion, metallic solid solution, Substitutional solid solutions, Interstitial solid solutions, binary isomorphous alloy systems

Introduction to material science tutorials and assignment work book

Author: ENG207

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207

Topics: Metallic Materials, metal, alloy, Ceramic Materials, Polymeric Materials, polymers, Composite Materials, chemical bonds, bonding, covalent bond, ionic bond, metallic bond, crystal structure, crystallography, atomic packing, Bravais lattices, crystal, unit cell, lattice point, crystallographic planes, density, Geometrical arrangement, solubility

Introduction to engineering materials lecture digest

Author: ENGR U MARK

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207

Topics: Atomic bonding, classification of materials, atomic packaging and crystal structures, unit cells and lattice points, pyrometallurgy, hydro metallurgy, electrometallurgy

Past Questions related to INTRODUCTION TO ENGINEERING MATERIALS 2 LECTURE DIGEST

Introduction to engineering materials 2

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: Elasticity, hardness, resistance, engineering materials, plasticity, density, ductility, electrolytes, electrochemical cell, magnetic field, Paramagnetism, diamagnetism, anti ferromagnetism, ferrimagnetism, semi conductors, polystyrene, commodity plastic, steel, tin, copper, axial stress, axial strain, corrosion

Composites

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME519

Topics: Composites, bimetal, alloys, composite materials, dispersion-strengthened composite material, wood plastic composites, tensile loadings, compressive loadings, fiber reinforced composites, modulus of elasticity, bimetals, laminated glass, hand lay-up processing technique, pultrusion processing technique

BASIC ELECTRONICS-TEST&EXAM

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: EEE202

Topics: energy band, conductors, insulators, semi conductors, valence electron, Fermi function, Fermi-Dirac, conductivity, mobility

INDUSTRIAL ALLOYS

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MTE524

Topics: alloys, phase, iron-cementite, carbon, alpha iron, eutectic, steel, cast iron, metal

Industrial alloys

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MTE524

Topics: Industrial alloys, iron cementite phase diagram, crystallization, recrystallization, industrial recrystallization, eutectic reaction, ferrous alloy, non-ferrous alloy, steel, carbon steel, low alloy, high allow, high-speed steels, Muntz metal, pewter, Elinvar

MATERIALS TECHNOLOGY

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MCE403

Topics: MATERIALS TECHNOLOGY, materials, steam plant, corrosion, rotor, fiber optic, conductivity, semi conductor, super conductor, oxide, reaction, heat transfer, steady-state, transient, sensor

INTRODUCTION TO ENGINEERING MATERIALS 2-2012,2016,2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: mechanical properties, Mechanical testing, wood, corrosion, plastic, ceramic, alloy

Mechanical properties of materials

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME413

Topics: Materials mechanical properties, true strain, tensile test, true stress-strain curve, tensile uniaxial flow stress, uniform plastic deformation, ultimate tesnile strength

Corrosion science and engineering

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME403

Topics: Corrosion science, corrosion engineering, metal tube wall erosion corrosion, activation polarization, concentration polarization, anodic inhibitor, inhibition efficiency

Polymer processing engineering technology

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE521

Topics: Plastics machining, machinability, polymer processing engineering technology, design, manufacturing composite, specific cutting force

Strength of materials

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: proportional limit, elastic limit, deformation, strain, tensile stress, failure strength, Mohr's circle

Materials for biomedical applications

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MAE525

Topics: Biomaterial devices, biomaterials, hearing aids, wearable artificial limbs, biomaterial fabrication, blood vessels, bone replacement, dental replacement, ear replacement, bioceramics, wound-healing process, metallic biomaterials corrosion, biosensor, biosensor application, titanium alloys, dental implants

Analysis and resting of polmeric and textiles

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE322

Topics: Polymer analysis, polymer testing, plastic region, breaking point region, elastic limit region, fabrics water repellency, fabrics absorbency, fabrics air permeability, toughness, ultimate tensile strength, tear resistance, impact strength test

Man made fibre production

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE314

Topics: Man made fibre production, polymer testing, polymer analysis, elastic limit region, plastic region, breaking point region, fabric air permeability, fabrics water repellency, fabrics absorbency, toughness, ultimate tensile strength, tear resistance, colour fastness, impact strength test

Novrazbb Yotjob distinctquote yourowndir muttcat scholarship carlesto newsfunt