Reservoir Engineering by Sylvester Okotie, Bibobra Ikporo PDF free download

Sylvester Okotie, Bibobra Ikporo Reservoir Engineering PDF, was published in 2018 and uploaded for 400-level Engineering students of Federal University of Petroleum Resources, Effurun (FUPRE), offering PNG410 course. This ebook can be downloaded for FREE online on this page.

Reservoir Engineering ebook can be used to learn Reservoir Engineering, reservoir, reservoir geometry, phase envelope, unsteady flow, productivity index, relative permeability behavior, oil formation volume factor, hydrocarbon reserves, volumetric reserves estimation, contour, condensate reservoir calculation, water influx, aquifer influs, aquifer models, pot aquifer model, Schilthuis model, Hurst modified steady-state model, Van Everdingen moder, Carter-Tracy model, Fetkovich Aquifer model, material balance, reservoir drive mechanisms, gas cap expansion drive, rock compressibility, connate water expansion drive, gas drive reservoir, water drive reservoir, decline curve analysis, pressure regimes, fluid contacts, inflow performance relationship, history matching, pressure match, reservoir performance prediction.

Technical Details
Updated at:
Size: 11.63 MB
Number of points needed for download: 47
Number of downloads: 21

Books related to Reservoir Engineering

Applied Petroleum Reservoir Engineering, Third edition

Author: Ronald Terry, Brandon Rogers

School: University of Port Harcourt

Department: Engineering

Course Code: PNG307

Topics: peak oil, rock properties, isothermal compressibilty, gas law, specific gravity, material balance equation, Havlena method, odeh method, single-phase reservoirs, gas reservoir, gas-condensate reservoir, lean gas cycling, water drive, oil reservoir fluid, Kelly-Snyder field, canyon reef reservoir, Gloyd-mitchell zone, Rodessa field, water compressibility, saturated oil reservoir, gas liberation technique, volatile oil reservoir, Darcy's law, permeability, steady-state flow, linear flow, radial flow, transient flow, pseudosteady-state flow, productivity ratio, superposition, drawdown testing, skin factor, buildup testing, water influx, steady-state model, unsteady-state model, Van Everdingen drive model, Hurst Edgewater drive model, bottomwater drive, recovery efficiency, microscopic displacement efficiency, relative permeability, macroscopic displacement efficiency, immiscible displacement process, Buckley-leverett displacement, Oil recovery

Basic petroleum geology

Author: Peter Link

School: Federal University of Petroleum Resources, Effurun

Department: Engineering

Course Code: PEE315

Topics: earth structure, lithosphere, mantle, core, specific gravity, Earth's magnetic field, plate tectonics, continental drift, continental margin, geologic time, historical geology, stratigraphy, relative time, absolute time, radiometric time scale, geologic time scale, palentology, Minerals, rocks, weathering, erosion, deposition, Marine erosion, Marine deposition, depositional basin, Lacustrine environment, Desert environment, Glacial Environment, subsurface water, Diagenesis, structural geology, petroleum traps, petroleum, reservoir, recovery techniques, exploration techniques, igneous rock, sedimentary rock, metamoprphic rock, rock cycle, mechanical weathering, chemica weathering, weathering products, downslope movement, floodplain deposits, delta deposits, stream deposits, Marine depth zones, Marine currents, wave types, wave refraction, erosional features, marine shoreline, marine deposition, Basin, Lake basin, lacustrine deposition, lacustrine deposits, desert erosion, desert deposition, desert deposits, Glacier, glacial deposition, glacial deposits, groundwater classification, aquifer, water table, water well, ground water processes, groundwater products, lithification, induration, diagenesis, fracturing, stress, strain, faults, folds, strike, dip, superposition, decriptive geometry, stereographic projection, hydrocarbon traps, structural traps, stratigraphic traps, combination traps, unconformity traps, crude oil, natural gas, reservoir performane, reservoir pressure, resevoir loss, reservoir destruction, reservoir rocks, clastic reservoirs, carbonate reservoirs, seals, pressure-data, geometry, fluid content, Rock sampling, fluid flow, porosity, permeability, reservoir properties, surface geology, surface data, surface geology, drilling operations, well cuttings, cores, electric logging, radioactivity logging, acousting logging, sonic logging, spontaenous potential logs, self potential logs, resistivity logs, induction logs, dual induction-focused logs, electrode logs, radioactivity logs, acoustic logs, drill stem tests, geophysical surveys, geochemical surveys, maps, cross-sections

Reservoir Engineering Handbook

Author: Tarek Ahmad

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET304, PET403, PET502

Topics: Reservoir Fluid Behavior, Reservoir-Fluid Properties, Reservoir Fluids, Rock Properties, Relative Permeability Concepts, Reservoir Fluid Flow, Oil Well Performance, Gas and Water Coning, Water Influx, Oil Recovery Mechanisms, Material Balance Equation, Oil Reservoir Performance, Gas Reservoirs, Waterflooding, Vapor-Liquid Phase Equilibria

Principles of Chemical Engineering Processes Material and Energy Balances

Author: Nayef Ghasem, Redhouane Henda

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CHE202

Topics: Chemical Engineering Processes, Material Balance, Energy Balance, temperature measurement, temperature conversion, dimensional homogeneity, dimensionless quantities, process flow sheet, process unit, process streams, mass flow rates, volumetric rates, moles, molecular weight, stream composition, mass fraction, mole fraction, concentration, pressure measurement, pressure-sensing devices, process units, degrees of freedom analysis, process flow diagram, multiunit process flow diagram, mass balance, Stoichiometric Equation, Stoichiometric Coefficients, Stoichiometric Ratio, Limiting Reactant, Excess Reactants, Combustion Reactions, Chemical Equilibrium, Multiple-Unit Process Flowcharts, Single-Phase Systems, Multiphase Systems, Ideal Gas Equation of State, liquid density, solid density, gas density, Real Gas Relationships, Compressibility Factor, Virial Equation of State, van der Waals Equation of State, Soave–Redlich–Kwong Equation of State, Kay’s Mixing Rules, phase diagram, Vapor–Liquid Equilibrium Curve, Vapor Pressure Estimation, Clapeyron Equation, Clausius–Clapeyron Equation, Cox Chart, Antoine Equation, Partial Pressure, Dalton’s Law of Partial Pressures, Gibbs’ Phase Rule, Bubble Point, Dew Point, Critical Point, Kinetic Energy, Potential Energy, energy balance, steam turbine, heaters, coolers, compressors, Mechanical Energy Balance, Enthalpy Calculations, Constant Heat Capacity, Psychrometric Chart, Heat of Reaction, Heats of Formation, Heat of Combustion, Heat of Reaction Method, Unsteady-State Material Balance, Unsteady-State Energy Balance

FUNDAMENTALS OF RESERVOIR ENGINEERING

Author: LP Dake

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET304, PET403, PET502

Topics: reservoir engineering, MATERIAL BALANCE APPLIED TO OIL RESERVOIRS, PVT ANALYSIS FOR OIL, DARCY'S LAW AND APPLICATIONS, WELL INFLOW EQUATIONS FOR STABILIZED FLOW CONDITIONS, BASIC DIFFERENTIAL EQUATION FOR RADIAL FLOW IN A POROUS MEDIUM, REAL GAS FLOW, GAS WELL TESTING, NATURAL WATER INFLUX, MMISCIBLE DISPLACEMENT

Fluid mechanics and hydraulics

Author: Mahesh kumar

School: Chukwuemeka Odumegwu Ojukwu University

Department: Engineering

Course Code: ENG232

Topics: fluid pressure, hydrostatic forces, submerged surfaces, buoyancy, floatation, fluid kinematics, fluid dynamics, vortex flow, potential flow, ideal fluid flow, laminar flow, viscous flow, boundary layer theory, compressible flow, model similitude, free jets, fluid machines, pelton turbine, impulse turbine, francis turbine, radial flow reaction turbines, propeller, kaplan turbine, axial flow reaction turbines, hydraulic turbines, centrifugal pumps, reciprocation pumps, hydraulic systems, fluid continuum, fluid properties, specific weight, weight density, viscosity, perfect gas law, isobaric process, adiabatic process, surface tension, capillarity, capillary effect, vapour pressure, cavitation, pascal's law, hydrostatic law, Bouyant force, centre of buoyancy, archimedes principle, metacentre, metacentric height, cauchy-reimann equations, Euler's equation, Bernoulli's equation, continuity equation, orfices, hydraulic coefficients, uniform flow, source flow, sink flow, free vortex flow, notches, weirs, francis formula, bazin formula, rehbock formula, cipolletti weir, reynolds experiment, Navier-stoke equation, efflux viscometer, ogee weir, boundary layers, stagnation pressure, stagnation density, stagnation temperature, specific energy curve, critical depth, critical velocity, sub-critical flow, hydraulic jump, francis turbine, velocity triangle, draft tube, rotodynamic turbine

Concrete Technology Theory and Practice, Multicolour Edition

Author: MS Shetty

School: Bayero University, Kano

Department: Engineering

Course Code: CIV5307

Topics: Concrete technology, Cements, Modern cements history, Portland cement manufacturing, Portland cement wet process manufacturing, Portland cement dry process manufacturing, Cement chemical composition, Cements hydration, Heat of hydration, Calcium silicate hydrates, Calcium hydroxide, calcium aluminate hydrates, hydrated cements structure, Water requirement for hydration, Cement types, ASTM cements classification, Ordinary Portland cement, Rapid hardened cement, Extra rapid hardening cement, Portland slag cement, Quick setting cement, super sulphated cement, low heat cement, Portland pozzolana cement, coloured cement, hydrophobic cement, masonry cement, expansive cement, Cement testing, Aggregates, aggregates testing, Aggregates form igneous rock, aggregates from sedimentary rocks, aggregates from metamorphic rock, aggregate crushing value, aggregates impact value, aggregate abrasion value, Deval attrition test, Dorry Abrasion test, Los Angeles test, modulus of elasticity, bulk density, specific gravity, Sieve analysis, Aggregates testing, Water, water qualities, Sea water for mixing concrete, Admixture, construction chemicals, Plasticizers, water reducers, Workability, Plasticizers action, Superplasticizers classification, Factors affecting workability, Superplasticizers types, Fresh concrete, Fresh concrete water content, Fresh concrete mix proportions, Aggregates sizes in fresh concrete, Aggregates shape, Surface texture, Admixture use in fresh concrete, Workability measurement, Slump test, k-slump test, aggregates grading, compacting factor test, flow test, flow table apparatus, vee bee consistometer test, setting of concrete, Manufacture of concrete process, Concrete compaction, Concrete curing, Concrete strength, Water-cement ratio, Strength gaining with age, Concrete maturity concept, Bond strength, High strength concrete, Elasticity, Creep, Shrinkage, Aggregates elastic properties, Modulus of Elasticity, Dynamic modulus of elasticity, Poison's ratio, Creep rheological representation, Creep measurement, Factors affecting creep, Aggregate influence, Mix proportion influence, Shrinkage, Plastic Shrinkage, Drying Shrinkage, Moisture movement, Autogenous Shrinkage, Carbonation shrinkage, Concrete Durability, Strength to Durability relationship, Concrete volume change, Durability definition, durability significance, Permeability, Cement paste permeability, Concrete permeability, Plastic shrinkage cracks, Settlement cracks, Thermal shrinkage, Hardened concrete testing, Concrete mix design, Special concrete, concrete methods

Production and Transport of Oil and Gas Gathering and Transportation, Second Edition

Author: AP Szilas

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET511

Topics: Separation of oil and gas, Valves, pressure regulators, Line pipes, Separator selection, On-lease oil storage, Fluid tolume measurement, Pipeline transportation of oil, Pressure waves, waterhammer, Slug transportation, Isothermal oil transport, isothermal oil transport system, Non-isothermal oil transport, Transient flow in pipeline systems, Steady-state flow in pipeline systems

A Textbook of Fluid Mechanics and hydraulic machines, 9th edition

Author: RK bansal

School: Covenant University

Department: Engineering

Course Code: CVE332

Topics: Fluid Mechanics, hydraulic machines, viscosity, compressibility, bulk modulus, surface tension, capillarity, vapor pressure, cavitation, Pascal's law, manometers, Piezometer, differential manometer, isothermal process, buoyancy, flotation, meta-center, fluid flow, continuity equation, velocity, acceleration, velocity potential function, stream function, equipotential line, Vortex flow, ideal flow, potential flow, momentum equation, free liquid jets, orifices, mouthpieces, notches, weirs, viscous flow, turbulent flow, Reynolds experiment, dimensional homogeneity, model analysis, dimensionless numbers, Boundary layer flow, compressible flow, Mach number, Jet propulsion, hydraulic machines, turbines, Pelton wheel, Radial flow reaction turbines, Francis turbine, axial flow reaction turbine, Draft tube, specific speed, unit quantities, centrifugal pumps, cavitation, maximum suction lift, net positive suction head, reciprocating pumps, air vessels, fluid system, hydraulic press, hydraulic accumulator, hydraulic intensifier, hydraulic ram, hydraulic lift, hydraulic crane, hydraulic coupling, hydraulic torque converter, air lift pump, gear-wheel pump

Soil and Water Conservation for Productivity and Environmental Protection, 4th edition

Author: Frederick Troeh, Arthur Hobbs, Roy Donahue

School: National Open University of Nigeria

Department: Agriculture and Veterinary Medicine

Course Code: SLM308

Topics: Soil Conservation, Water Conservation, erosion, Soil Erosion and Civilization, Geologic Erosion, Sedimentation, Landscape Development, rock types, Sedimentary Landforms, Mass Movement Deposits, Glacial Landscapes, Water Erosion, erosion damage, Vegetation, Soil Properties, Soil Erodibility, pollution, Water-Erosion Control, Wind Erosion, wind erosion process, Windbreaks, Shelterbelts, Wind-Erosion Control, Predicting Soil Loss, Tolerable Soil Loss, Universal Soil Loss Equation, Computer-Based Soil Loss Prediction Models, Wind-Erosion Prediction Equation, Wind Erosion Prediction System, Soil Map Unit Interpretations, soil survey, Land Use Planning, managing land, cropping systems, Managing Monocultures, crop rotations, Multiple Cropping, Evaluating Cropping Systems, strip cropping, tillage, Conservation Tillage, deep tillage, Contour Cultivation, Emergency Wind-Erosion Control, Gully-Control Structures, road ditches, culverts, Earthen Dams, Streambank Protection, flood control, Wind Erosion-Control Structures, Pastureland Management, Rangeland Management, Forestland Management, water cycle, drought, Soil Drainage, wetlands, Irrigation, Irrigation Methods, Land Reclamation, Conservation Irrigation, soil pollution, pollutants, industrial wastes, agricultural wastes, aerosols, polluted soil, Hazardous Sites, Soil Remediation, Water Quality, water Pollution, Water acidification, Farm Service Agency

Well testing

Author: John lee

School: Abubakar Tafawa Balewa University, Bauchi

Department: Engineering

Course Code: PEE513

Topics: well testing, fluid flow, Pressure Buildup Tests, Flow Tests, Gas Well Testing, Dimensionless Variables, Van Everdingen Solutions, Hurst Solutions, Diffusivity Equations

Fluid mechanics

Author: IO Arukalam

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309

Topics: fluid resistance, Reynolds number, newtonian and non-newtonian fluid flow, laminar flow analysis, turbulent flow analysis, Newtonian fluids, non-newtonian fluids, fluid resistance, fluid resistance equation, laminar flow, turbulent flow, Reynolds number, unsteady fluid flow

Applied Thermodynamics, 2nd edition

Author: RK Rajput

School: Federal University of Agriculture, Abeokuta

Department: Engineering

Course Code: MCE309

Topics: Applied Thermodynamics, Thermodynamics, steam, Internal Latent Heat, entropy, steam generators, boilers, steam boiler, Fire Tube Boilers, Water Tube Boilers, High Pressure Boilers, boiler mountings, draught, chimney, evaporative capacity, boiler efficiency, steam power cycles, Carnot cycle, Rankine cycle, Modified Rankine cycle, Regenerative cycle, Reheat cycle, Binary vapour cycle, reciprocating steam engine, compound steam engines, Multi-Cylinder Engines, uniflow steam engine, steam nozzles, nozzle efficiency, steam injector, steam turbines, turbine efficiencies, reheating steam, steam turbine governing, steam turbine control, steam condensers, condensing plant, jet condensers, surface condensers, gas power cycles, air standard efficiency, dual combustion cycle, Atkinson cycle, Ericsson cycle, Brayton cycle, internal combustion engines, Four-Stroke Cycle Engines, Two-Stroke Cycle Engines, ignition system, fuel injection system, electronic fuel system, cooling system, lubrication systems, Performance Number, Combustion Chamber Design, octane number, Diesel Knock, cetane number, supercharging, dissociation, Engine Performance Curves, Wankel Rotary Combustion Engine, Stratified Charge Engines, Duel-Fuel Engines, air compressors, Reciprocating Compressors, volumetric efficiency, Multi-stage Compression, compressor performance, intercooler, Compressed Air Motors, Rotary Compressors, gas turbines, jet propulsion, Open Cycle Gas Turbines, Constant Volume Combustion Turbines, Gas Turbine Fuels, refrigeration, Air Refrigeration System, Simple Vapour Compression System, Vapour Absorption System, Refrigerants, Air-conditioning Systems, Air-conditioning, load estimation, Air Distribution

Petroleum Related Rock Mechanics, 2nd edition

Author: Fjaer, RM Holt, Horsrud, AA Raaen, Risnes

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET415

Topics: elasticity, stress, strain, elastic moduli, strain energy, thermoelasticity, poroelasticity, anisotropy, nonlinear elasticity, failure mechanics, tensile failure, shear failure, compaction failure, underground stress, pore pressure, sedimentary rocks, borehole failure criteria, rock mechanics, rock acoustics, reflections refractions, borehole acoustics, seismic, rock models, grain pack models, fractured rocks, unstable boreholes, time-delayed borehole failure, hydraulic fracturing, reservoir geomechanics, compaction, subsidence, well problems

Applied Well Test Interpretation

Author: John Spivey, John Lee

School: Abubakar Tafawa Balewa University, Bauchi

Department: Engineering

Course Code: PEE513

Topics: Well Test Interpretation, well test, wellbore storage, Radial Flow Semilog Analysis, Log-Log Type Curve Analysis, Pressure Transient Testing, gas flow equation, flow regimes, diagnostic plot, bounded reservoir behavior, Variable Flow Rate, flow rate, wellbore phenomena, Near-Wellbore Phenomena, Well Test Interpretation Workflow, Well Test Design Workflow

Engineering economics material

Author: ENG FUTO

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG212

Topics: Engineering economy, engineering process, debt capital, equity, interest, interest formula, time value of money, cash flows over time, single payment compound amount factor, single-payment present-worth factor, equal-payment-series compound-amount factor, present-worth factor, functional notation, interest-formula relations, arithmetic gradient series factor, uniform-gradient-series factor, nominal interest rates, effective interest rates, capital-recovery factor

Engineering Fundamentals and Problem Solving, 6th edition

Author: Arvid Eide, Roland Jenison, Larry Northup, Steven Mickelson

School: Edo University

Department: Engineering

Course Code: GEE214

Topics: Engineering profession, engineering team, engineering function, engineering design, engineering solutions, engineering measurement, engineering estimations, dimensions, units, conversions, engineering economics, annual worth, annual future worth, sinking fund, decision making, economic decision making, statistics, inferential statistics, sampling, chi-square distribution, F-distribution, mechanics, statics, forces, resultant force, scalars, vectors, strain, design stress, material balance, energy sources, energy alternatives, coal formation, natural gas formation, electrical theory, static electricity, electric potential, Kirchhoff's laws, Mesh current

Unit Operations of Chemical Engineering, 5th edition

Author: Warren McCabe, Julian Smith, Peter Harriott

School: Institute of Management Technology

Department: Engineering

Course Code: CHE303

Topics: Fluid Mechanics, Fluid-Flow Phenomena, Equations of Fluid Flow, Flow of Incompressible Fluids, Flow of Compressible Fluids, Flow past immersed bodies, Transportation of fluids, Metering of fluids, Agitation of liquids, mixing of liquids, Heat transfer, heat flow in fluids, Heat transfer to fluids without phase change, Heat transfer to fluids with phase change, Radiation heat transfer, Heat exchange equipment, Evaporation, Equilibrium stage operations, Distillation, multicomponent distillation, Leaching, Extraction, Diffusion, Mass Transfer between Phases, Gas Absorption, Humidification Operations, Drying of Solids, Adsorption, Membrane Separation Processes, Crystallization, Properties of Particulate Solids, Handling of Particulate Solids, Mixing of Particulate Solids, Mechanical Separations

Power Systems Analysis ,3rd edition

Author: Hadi Saadat

School: University of Ibadan

Department: Engineering

Course Code: EEE511

Topics: Power Systems Analysis, power system, electric power generation, fossil power plants, hydroelectric power plants, solar power, wind power plants, geothermal power, biomass power plants, fuel cell, modern power system, smart grid, energy control center, complex power, complex power balance, power factor corrrection, per phase analysis, balanced three-phase power, generator models, transformer models, per unit system, transformer performance, autotransformers, three-winding transformers, transmission line parameters, line model, line compensation, power flow analysis, bus admittance matric, Gauss-Seidel power flow solution, Newton-Raphson method, power flow programs, synchronous machine, transient analysis, unbalanced fault, stability, swing equation, transoent stability, steady-state stability, power system control, automatic generation control, load frequency control, MATLAB, frequency response, reactive power, voltage control, excitation system

Fundamentals of Engineering Thermodynamics ,9th Edition

Author: Michael Moran, Howard Shapiro, Daisie Boettner, Margaret Bailey

School: University of Nigeria, Nsukka

Department: Engineering

Course Code: MEC261

Topics: Engineering Thermodynamics, First Law of Thermodynamics, Control Volume Analysis, Second Law of Thermodynamics, Exergy Analysis, entropy, vapor power systems, gas power systems, Refrigeration, Heat Pump Systems, Thermodynamic Relations, Ideal Gas Mixture, Reacting Mixtures, Combustion, Chemical Equilibrium, Phase Equilibrium, energy storage, Generalized Compressibility Chart.ideal gas model, Polytropic Process Relations.nozzle, diffuser, turbine, compressor, pump, heat exchanger, throttling devices, transient analysis, mass rate balance

Past Questions related to Reservoir Engineering

Reservoir Engineering 2011, 2012, 2015, 2016 & 2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET403

Topics: Reservoir Engineering, retrograde condensation, reservoir barrel, stock tank barrel, reservoir pore volume hydrocarbon pore volume, high shrinkage oil, low shrinkage oil, oil formation volume factor, solution gas-oil ration

Work study and productivity 2018 & 2019

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: IPE403

Topics: Work study, work productivity, reliability, maintainability, inputs availability, efficiency, effectiveness, service delivery, labour productivity, waste reduction, equipment productivity, work study, work measurements, ergonomic, value analysis, excess work content, fatigue, job elements, partial productivity, total productivity, productivity auditor

Reservoir modelling and simulation

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET505

Topics: Reservoir modelling, reservoir simulation, history matching, history matching optimization, reservoir simulation study process, history matching parameters, oil phase partial differential equation, Gaussian elimination method, finite difference approximation, Taylor series expansion, tri-diagonal matrix, incompressible flow equation

Petroleum production engineering 1

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET306

Topics: Petroleum production engineering, critical point, cricondentherm, cricodenbar, retrograde condensation, dry gas reservoir, wet gas reservoir, bubble point curve, dew point curve, Gas condensate, Standing-Katz solutions, constant composition expansion test, differential liberation experiment, isothermal compressibility, Bubble point pressure, gas solubility, crude oil viscosity, crude oil density, bottomhole completion, Darcy's law, oil production

Reservoir engineering 3

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET502

Topics: Reservoir engineering, pressure analysis, single well tests, multiple well test, reservoir limit test, secondary oil recovery, water influx, gas coning, water coning

Multiple phase flow in pipes

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET517

Topics: Pipe Multiple phase flow, multiphase heat transfer, stratified flow, Taylor bubbles, slug-free flow, Taitel-Dukler flow regime models, boiling, condensation, evaporation, fluid transportation, Boiling regimes, natural convection boiling, nucleate boiling, transition boiling, film boiling, total pressure drop equation

Natural gas engineering

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET521

Topics: Natural gas engineering, dew point curve, bubble point curve, cricondenbar, cricodentherm, dry gas phase behavior, wet gas phase behavior, retrograde phase behavior, iron sponge sweetening, alkanol amine sweetening, glycol process, amine process, natural gas field processing

Polymer rheology 1

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE411

Topics: Polymer rheology, Newtonian fluid, pseudolastric liquids, dilatant fluid, Bingham fluid, casson fluid, rheopectic fluid, thixotropic fluid, stress relaxation, creep deformation, polymer rheology, time-independent fluids, pseudoplastic fluid, Casson fluid, Ostwald-de Waele equation, Maxwell model, Maxwell element, cone-and-plate viscometer, creep formation, rheometers, rheological equation, fluid viscosity, volumetric flow rate

Oilseed processing and utilization

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: FST513

Topics: Oilseed processing, Oilseed utilization, palm oil processing, oilseed processing, African locus bean processing techniques, oil palm fruit processing, palm oil clarification, palm oil purification, palm oil packaging, palm kernel oil production, palm kernel nut, palm kernel oil, palm kernel cake, palm kernel sludge, sunflower seed oil manufacture, groundnut oil characteristics, aqueous alcohol leach, dilute acid leach, moist heat water leach, oil seeds quality, oil seed processing

Reservoir engineering 2

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET403

Topics: Reservoir engineering, bubble point curve, critical point, dew point curve, cricondentherm, cricondenbar, reservoir fluid sampling, oil flow rate, pressure profile

Petroleum engineering

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET317

Topics: Petroleum engineering, efficiency porosity, total porosity, akata formation, agbada formation, Paleocene age, Eocene age, Miocene age, source rock, seal rock, reservoir rock, overburden rock, sedimentary rock, petroleum trap, structural trap, combination trap, stratigraphy trap, seismic waves, water porosity, gas porosity, oil porosity

Introduction to process calculation 2017 & 2019

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: FST204

Topics: process calculation, density, pressure, heat, heat transfer, material balance, food processing operations, triple point of water, kinetic theory

Petroleum rock mechanics

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET415

Topics: Petroleum rock mechanics, isotropic rock, anisotropic rock, rock dynamic properties, shear modulus, young's modulus, elastic region, yield point, chip hold down, uniaxial compressive strength, ductile region, brittle region, shear failure, hydro pressure, abnormal formation pore pressure, overburden pressure

RESERVOIR ENGINEERING 2-2012,2015,2016,2017,2019

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET403

Topics: reservoir, shrinkage, gas, volume, formation

Tests related to Reservoir Engineering

Physics (JAMB)

School: WAEC, JAMB & POST UTME

Department:

Course Code: JAMB

Topics: Physics, JAMB, Friction, work, force, motion, speed, velocity, energy, hydraulic press, relative density, hydrometer, gas law, sound wave, wave, light, mirror,capacitor, electricity, pressure