Design of Structural Elements by WMC McKenzie PDF free download

WMC McKenzie Design of Structural Elements PDF, was published in 2004 and uploaded for 300-level Engineering students of Bayero University, Kano (BUK), offering CIV3307 course. This ebook can be downloaded for FREE online on this page.

Design of Structural Elements ebook can be used to learn Structural elements design, Structural Analysis Techniques, Shear Force, Bending moment, Shear force diagram, Bending moment diagram, Deflection of Beams, Elastic Shear stress distribution, Elastic Bending stress distribution, Transformed sections, Moment distribution, Bending stiffness, Rotational Stiffness, Carry-over moment, Pinned End, Free Moments, Fixed bending moments, Distribution Factors, Design Philosophies, Permissible stress Design, Load Factor Design, Limit State Design, Design codes, Eurocodes, National Annex, Structural Loading, Dead loads, Imposed loads, Imposed roof loads, Floor load distribution, Load distribution, Structural Instability, Overall Stability, Robustness, Reinforced concrete Element's Design, Structural Steelwork Elements' Design, Structural Timber Elements' Design..

Technical Details
Updated at:
Size: 13.2 MB
Number of points needed for download: 51
Number of downloads: 26

Books related to Design of Structural Elements

Strength of Material, Second Edition

Author: SS Rattan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Simple stress, simple strain, Shear stress, Saint-Venant's principle, Stress, strain, Modulus of elasticity, Modulus of Rigidity, Bar elongation, Superposition principle, Tapering section Bars, Elongation due to self-weight, Uniform strength column, Statically indeterminate systems, Temperature stresses, Shrinking on, Strain analysis, Tensile test diagram, Elastic constants, Three-Dimensional stress systems, Compound stress, compound stress, Principal stresses, Maximum shear stresses, Mohr's Stress cycle, Three coplanar stress, Ellipse of Stress, Strain Analysis, Principal Strain, Principal shear strain, Mohr's Strain cycle, Strain Energy, Shear force, Bending moment, Supports types, Bending stress in beams, Simple bending theory, Moment of inertia, Flitched beams, composite beams, Unsymmetrical bending, Ellipse of inertia, Shear stress in beams, Shear stress variation, Built-up beams, Shear centre, Deflection, Beam differential equation, Deflection at a point, Macaulay's method, Moment-Area method, Strain energy due to bending, Castigliano's First theorem, Deflection by castigliano's Theorem, Impact loading on beams, conjugate beam method, Betti's reciprocal deflections theorem, Maxwell's Reciprocal Deflection theorem, Fixed beams, Continuous beams, Fixidity Effects, Clapeyron's three moment equation, Torsion, Springs, Columns, Struts, Failure Theories, Plastic bending, Plane frame structures, Materials properties, Materials testing, Tensile testing, Compression testing, Torsion testing, Hardness testing, Impact testing, Fatigue testing

Concrete Technology Theory and Practice, Multicolour Edition

Author: MS Shetty

School: Bayero University, Kano

Department: Engineering

Course Code: CIV5307

Topics: Concrete technology, Cements, Modern cements history, Portland cement manufacturing, Portland cement wet process manufacturing, Portland cement dry process manufacturing, Cement chemical composition, Cements hydration, Heat of hydration, Calcium silicate hydrates, Calcium hydroxide, calcium aluminate hydrates, hydrated cements structure, Water requirement for hydration, Cement types, ASTM cements classification, Ordinary Portland cement, Rapid hardened cement, Extra rapid hardening cement, Portland slag cement, Quick setting cement, super sulphated cement, low heat cement, Portland pozzolana cement, coloured cement, hydrophobic cement, masonry cement, expansive cement, Cement testing, Aggregates, aggregates testing, Aggregates form igneous rock, aggregates from sedimentary rocks, aggregates from metamorphic rock, aggregate crushing value, aggregates impact value, aggregate abrasion value, Deval attrition test, Dorry Abrasion test, Los Angeles test, modulus of elasticity, bulk density, specific gravity, Sieve analysis, Aggregates testing, Water, water qualities, Sea water for mixing concrete, Admixture, construction chemicals, Plasticizers, water reducers, Workability, Plasticizers action, Superplasticizers classification, Factors affecting workability, Superplasticizers types, Fresh concrete, Fresh concrete water content, Fresh concrete mix proportions, Aggregates sizes in fresh concrete, Aggregates shape, Surface texture, Admixture use in fresh concrete, Workability measurement, Slump test, k-slump test, aggregates grading, compacting factor test, flow test, flow table apparatus, vee bee consistometer test, setting of concrete, Manufacture of concrete process, Concrete compaction, Concrete curing, Concrete strength, Water-cement ratio, Strength gaining with age, Concrete maturity concept, Bond strength, High strength concrete, Elasticity, Creep, Shrinkage, Aggregates elastic properties, Modulus of Elasticity, Dynamic modulus of elasticity, Poison's ratio, Creep rheological representation, Creep measurement, Factors affecting creep, Aggregate influence, Mix proportion influence, Shrinkage, Plastic Shrinkage, Drying Shrinkage, Moisture movement, Autogenous Shrinkage, Carbonation shrinkage, Concrete Durability, Strength to Durability relationship, Concrete volume change, Durability definition, durability significance, Permeability, Cement paste permeability, Concrete permeability, Plastic shrinkage cracks, Settlement cracks, Thermal shrinkage, Hardened concrete testing, Concrete mix design, Special concrete, concrete methods

Reinforced Concrete Design To Eurocode 2

Author: Bill Mosley, John Bungey, Ray Hulse

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3307

Topics: Reinforced Concrete Design, Design processes, composite action, stress-strain relations, shrinkage, thermal movement, creep, materials specification, Limit state design, Characteristics material strengths, Combination of actions, Load combinations, Beams analysis, Frames Analysis, Shear wall structures resisting horizontal loads, Moments redistribution, Rectangular-parabolic stress block, Triangular stress block, Shear, bond, Torsion, Anchorage bond, span-effective depth ratio, deflection calculation, flexural cracking, Thermal cracking, Shrinkage cracking, Reinforced concrete beams design, Reinforced concrete slabs design, Column design, column classification, slender column design, Foundations design, Retaining walls design, Prestressed concrete, Water-retaining structures, composite construction, Footings, Reinforcement details, Shear connector design

Advanced Structural Mechanics

Author: David Johnson

School: Bayero University, Kano

Department: Engineering

Course Code: CIV5304

Topics: Structural Mechanics, Elasticity, Elasticity theory, Stress, Displacements, strains, Plane stress, Stress function solution, Finite element method, Triangular element theory, concrete cube analysis, Finite element types, Eight-nodded isoperimetric element, Assessment of solution accuracy, Plain strain, Torsion, Torsion behavior, Solid sections, Circular sections, Non-circular sections, Finite difference solutions, solution comparison methods, solid sections properties, Thin-walled sections, singly closed sections, open sections, Plates, slabs, Beam analogy, Grid analogy, Poisson's ratio effect, Elastic plate theory, Moments, curvatures, Equilibrium, General elastic plate equation, Boundary conditions, Thin shells, Axisymmetric shells Membrane theory, Circular cylindrical shells bending, Structural dynamics, Vibration Types, Free, undamped vibration, Free, damped vibration, Forced, damped vibration, Beams Analysis

Design of structural elements, 3rd Edition

Author: Chanakya Arya

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3307, CIV4204, CIV5405

Topics: Structural Design, Design Philosophy, Design Basics, Basic structural concepts, materials properties, Design loads acting on structures, Design loads acting on elements, Structural analysis, Beam design, Column design, British Standard Structural design, Beams, Slabs, Foundations, Retaining walls, Design in structural steelwork to BS5950, Iron, Steel, Design Strength, Connections Design, Design in unreinforced masonry, Design in timber to BS5268, Structural design to Eurocodes

Properties and strength Of Materials

Author: Muhannad Zedan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: strength Of Materials, Simple stress, simple strain, Elastic materials, Hooke's law, Modulus of elasticity, Young's modulus, Brittle materials, Poisson's ratio, Shear stress, Modulus of rigidity, Double shear, Temperature stresses, Compound bar, Cantilever beams, Simple beams, Shear force, bending moment, Shear force diagram, bending moment diagram, Torsion, Crystalline structure, Metals crystalline structure, Atomic bonding, crystal structure, Body-centered cubic structure, Face-centered cubic structure, Hexagonal close-packed structure, grain structure, grain boundary, polymorphism, Slope of beams, deflection of beams, Fatigue, creep, Fracture, Creep test, Fracture mechanics, Linear fracture mechanics, Griffith's fracture criterion

Applied Strength of Materials, 6th Edition

Author: Robert Mott, Joseph Untener

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Direct Normal stress, stress, strain, Direct shear stress, Screw Threads, Experimental stress analysis, Computational stress analysis, Fundamental of statics, Materials design properties, Properties of steel, Properties of Cast Iron, Properties of Aluminum, Wood, Concrete, Plastics, Composites, Direct stress, Deformation, Computing design stress, Thermal stress, Bearing stress, Design bearing stress, Twisting, Elastic Torsional Deformation, Torsion, Beam loading, Beams supports, Beam types, Supports reactions, Centroids, Complex shapes centroid, Radius of Gyration, section modulus, Flexure formula, General shear formula, Special shear formulas, Shear flow, Beams deflection, combined stress, Columns, Slenderness Ratio, Buckling formula, Pressure vessels, Bolted connections design, Rivet joints, Eccentrically loaded riveted joints, Eccentrically loaded Bolted joints

Prestressed Concrete A Fundamental Approach, Fifth edition

Author: Edward Nawy

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE509

Topics: fiber stress, stress-strain curve of concrete, creep, shrinkage, nonprestressing reinforcement, ACI Maximum permissible stress, AASHTO maximum permissible stress, circular prestressing, elastic shortening of concrete, steel stress relaxation, creep loss, shrinkage loss, anchorage-seating loss, service-load design, composite beam, ultimate-strength flexural design, shear strength, torsional strength, web-shear reinforcement, dowel reinforcement, torsional behavior, indeterminate frame, indeterminate portal, camber, deflection, crack control, prestressed compression, tension member, LRFD, seismic shear

Building Materials, Revised Third Edition

Author: SK Duggal

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3302

Topics: Building Materials Principal Properties, Structural Clay Products, Brick's Classification, Brick's Testing, Clay Tiles, Terracotta, Porcelain, stoneware, Earthenware, Glazing, Rocks, Stones, Rock-forming minerals, Rock's Classification, Stone Durability, Stones Application, Stone seasoning, wood, wood Products, Trees Classification, Trees growth, Timber Preservation, Timber testing, Timber Structure, Timber's Fire Resistance, Properties of wood, wood products, wood-products applications, Material for making concrete, Cements, Portland cement, Raw materials chemical composition, Cement Hydration, Rate of Hydration, Hydration water requirement, Cements manufacturing, Cements testing, Cement Types, Cements storage, Aggregates, Aggregates classification, Aggregates characteristics, Deleterious Materials, Organic Impurities, Soundness, Aggregates Thermal Properties, Fine Aggregates, Coarse Aggregates, Cinder Aggregates, Mixing water Quality, Effect of mixing water from different source, Water for washing aggregates, Curing water, Lime, Limestone's Impurities, Limestone's Storage, Lime Vs Cement, Pozzolanas, Concrete, water-cement ratio, workability, Maturity, Defects, Re-vibration, Rheology, Non-destructive testing, Admixture for concrete, Concrete Mix design, Building Mortars, Ferrous Metals, Non-Ferrous Metals, Ceramic Materials, Polymeric Materials, Paints, Enamels, Varnishes, Tar, Bitumen, Asphalt, Gypsum, Special Cements, Cement Concretes, Adhesives, Water proofing materials, Fiber, Geosynthetics, Composite Materials, Smart materials, Asbestos, Thermoc0ol, Heat Insulating Materials, Sound Insulating Materials.

Bending moment and Shear Force

Author: ENG305

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: Computation of reactions, Computation of forces and moments, bending moment and shear force, bending moment diagram, beams of composite cross section

Storage and Transportation of Crude Oil, Natural Gases, Liquid Petroleum Products and Other Chemicals

Author: NU Okereke

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET511

Topics: Pipelines, Pipeline construction, Pipeline operations, Marine Tankers, Barges, Tank farms, Storage tanks, Atmospheric cone roof tanks, Atmospheric floating roof tanks, External floating roof tanks, open top floating roof tanks, Internal floating roof tanks, marine receipts, Tank gauging, Tank sampling, Tank venting, Tank cleaning

Craig's Soil Mechanics, 7th edition

Author: RF Craig

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3304

Topics: Soil mechanics, Soils basic characteristics, Soils nature, Particle size analysis, fine soils plasticity, Soil description, Phase relationships, Soil compaction, Seepage, Soil water, Permeability, Seepage theory, Flow nets, Anisotropic soil conditions, Non-homogenous soil conditions, Transfer condition, Grouting, Frost heave, Effective stress, effective stress principle, Partially saturated soils, Shear strength, Shear failure, Shear strength tests, Sands shear strength, Saturated clays Shear strength, Pore pressure coefficients, Stresses, displacements, Elasticity, Plasticity, Stresses from elastic theory, Displacement from elastic theory, Lateral earth pressure, Rankine's theory of earth pressure, Coulomb's theory of earth pressure, Gravity walls, Embedded walls, Braced excavations, Diaphragm walls, Reinforced soil, Slopes stability, Plane translational slip analysis, long-term stability, Embankment dams, Ground investigation, Borehole logs, Geophysical methods, Ground contamination

Applied mechanics, 3rd edition

Author: Hannah, MJ Hillier

School: Federal University, Oye-Ekiti

Department: Engineering

Course Code: MEE203

Topics: Applied mechanics, statics, mass, force, weight, couple, frameworks, friction, square-threaded screw, tribology, average speed, constant speed, velocity, free falling bodies, inertia, Variable forces, Periodic Motion, Simple harmonic motion, Car wheel balancing, Periodic time, simple pendulum, resonance, Angular acceleration, Centripetal acceleration, Centripetal force, Centrifugal force, Dynamic instability, balancing, static balance, dynamic balance, springs, energy, kinetic energy, potential energy, impulse, momentum, Impulsive forces, Inelastic collisions, aircraft, rockets, Reaction propulsion, Jet propulsion aircraft, Helicopters, Rocket propulsion, thrust, Ductile metals, metal, alloy, Shear Force, Bending Moment, Bending moment diagram, Poisson's ratio, stress, strain, Strain energy, Combined loading, Combined Bending, Direct Stress, fluid, pressure, Experimental Errors, discrepancy, error

Reinforced Concrete Structures Analysis and Design

Author: David Fanella

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE403, STE518

Topics: reinforced concrete, building code, building standard, reinforcement, loading, moment distribution, strength, serviceability, flexural member, compression member, tension member, axial load, two-way slab, column, preliminary column sizing, slenderness effect, biaxial loading, wall, foundation, footing, mat foundation

Engineering Drawing

Author: MA Pickup, F parker

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG103, ENG104

Topics: Lines, Lettering, Geometrical Constructions, Loci, Trochoids-involutes-Helices-Mechanisms, Orthographic Projection, First Angle, Third Angle, Dimensioning, Sectional Views, Full Sections-Section, Lines-Half Sections, Local Sections, Revolved Sections, Removed Sections, Part Sections, Off-set Sections, Aligned Sections, Conventions, Screw Threads, Hexagon Nuts, Bolts, Screws, Studs, Machine Screws-Hexagon Socket, Screws, Set Screws-Slotted, Grub Screws, Locking Devices, Keys, Cottered Joints, True Lengths, Isometric Projection, Oblique Projection, Technical Sketching, Machine Drawings

Tensile Testing, second edition

Author: JR Davis

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: Tensile Testing, Stress-Strain Curve, stress, strain, Ductility, Anisotropy, Tensile Loads, Uniaxial Tensile Testing, Tensile Testing Equipment, Strain Sensors, Gripping Techniques, Environmental Chambers, Product Design, Hardness-Strength Correlation, elastic modulus, mechanical testing, Sheet Formability, Formability Tests, Plane-Strain Tensile Testing, Anelasticity, Proportional Limit, damping, Fracture Characterization, Yield Point, Elastomers, plastic, ceramic, ceramic-matrix, Fiber-Reinforced Composites, High-Strain Rates, Hot Tensile Testing, temperature control, High Strain Rate Tensile Testing, Conventional Load Frames, Expanding Ring Test, Flyer Plate Loading, Short Duration Pulse Loading, Split-Hopkinson Pressure Bar Technique, Rotating Wheel Test

Power System Engineering Planning, Design, and Operation of Power Systems and Equipment ,2nd edition

Author: Juergen Schlabbach, Karl-Heinz Rofalski

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PSE513

Topics: Power System Engineering, Power System Engineering planning, Power System Engineering design, power system load, load forecast, Low-Voltage Systems, power system planning principles, power system planning criteria, loss evaluation, energy losses, power losses, power system topology, Busbar Arrangements, Double Busbar Arrangement, transformers, Thermal Permissible Loading, cable systems, Permissible Current, overload lines, Flexible AC Transmission Systems, Parallel Compensation of Lines, Serial Compensation of Lines, Phase-Shifting Equipment, HVDC-Transmission, Converter Stations, Breakers, Reactors, Electrodes, Load-Flow Calculation, Short-Circuit Current Calculation, faults, disturbances, Overcurrent Protection, Impedance Protection, Differential Protection of Lines, Ground-Fault Protection, Buchholz Protection, Overvoltages, Insulation Coordination, Slow-Front Overvoltages, Fast-Front Overvoltages, Neutral Earthing, Residual Current Compensation

Introduction to strength of materials, fourth edition

Author: RK Bansal

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: stress, strain, elastic constant, strain energy, shear force bending moment, center of gravity, moment of inertia, bending stress, deflection of beam, dam, deflection of cantilever

Logic circuit

Author: DK Kaushik

School: Federal University of Technology, Minna

Department: Engineering

Course Code: EEE211

Topics: number system, binary number system, octal number system, hexadecimal number system, binary addition, binary subtraction, signed numbers, complement representation, binary multiplication, floating point representation, binary codes, binary coded decimal numbers, weighted codes, self implementing codes, cyclic codes, gray code, error detecting codes, error correcting code, Hamming code, BCD addition, alphanumeric codes, Boolean algebra, logic gates, duality principle, Venn diagram, truth table, Karnaugh map, Quine – McCluskey Method, combinational switching circuits, combinational circuits, half adder, full adder, parallel binary adder, 8421 adder, BCD adder, subtractor, multiplexers, demultiplexers, code converter, encoders, priority encoder, magnitude comparator, parity generator, parity checker, programmable logic devices, Field Programmable Logic Array, Programmable Array Logic, Programmable Read Only Memory, Direct Coupled Transistor Logic, Integrated Injection Logic, transistor transistor logic, CMOS Logic, Flip flop, shift registers, counter, Asynchronous Counters, counter ICs, Digital to Analog Converter, Analog to Digital Converter, digital memory, semiconductor memory, read only memory, random access memory, magnetic memory, magnetic bubble memories, charged coupled devices, compact disk read only memory

A textbook of engineering mechanics ,12th multicoloured edition

Author: RS Khurmi

School: Federal University, Oye-Ekiti

Department: Engineering

Course Code: MEE203

Topics: engineering mechanics, resolution of forces, moments, parallel forces, couples, equilibrium of forces, center of gravity, centroid, moment of inertia, friction, static friction, limiting friction, lifting machines, support reactions, loading, concentrated load, point load, beams, loads, string, virtual work, linear motion, velocity, acceleration, relative velocity, projectiles, simple harmonic motion, laws of motion, helical springs, pendulums, elastic bodies, rotating masses, work, power, energy, hydrostatics

Past Questions related to Design of Structural Elements

Structural analysis

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE401

Topics: Structural analysis, consistent deformation method, collapse moment, collapse mechanism, plastic moment capacity, fixed end moments, stiffness factor, carry-over factor, moment equation method

REINFORCED CONCRETE DESIGN 2-2012-2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE518

Topics: column, beam, floor, shear, deflection, reinforcement, retaining wall, punching shear, yield line method, flat slab, slab, cantilever, dead load, preliminary design, bearing pressure analysis, stem wall design, stem wall reinforcement, axial load, unaxial moment, slender column

Strength of Materials

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: uniaxial stress, biaxial stress, theory of columns, deflection of beams, bending stress, shear force, bending moment, torsion.column, beams

DESIGN OF STEEL STRUCTURES

Year: 2016

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE505

Topics: beams, support, dead loading, imposed loading, flange, joint

Organoleptic factors of food

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: FST533

Topics: Food organoleptic factors, food organoleptic evaluation, food extrinsic organoleptic factors, food intrinsic organoleptic factors, food colour, food product development, food moisture content, water sorption isotherm, humectants, food moisture estimation, drying curve water activity, control water activity

Introduction to wood work design

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE335

Topics: Wood work design, timber flooring system, timber floor joists, wood, timber defects, timber seasoning, wood seasoning, joint allowable load

Strength of materials 2016,2017

Year: 2017

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: Shear stress, force, load, normal stress, stress, factor of safety, modulus of elasticity, modulus of rigidity, mohr's circle, beams, cantilever, deflection, deformation, flexural rigidity, columns

Civil engineering materials

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE204

Topics: Civil engineering materials, concrete, concrete setting time, concrete segregation, fresh concrete, hardened concrete, plastic concrete, fresh concrete breeding, compressive strength, admixtures, batching, curing, workability, steel, steel corrosion, coal tar, asphalt

Strength of materials

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: Shear Force, Bending Moment, Torsion, Theory of Columns, Deflection of Beams, Axial and Flexural Bending Stress, Strength of materials

Chemical process control and dynamics

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CHE501

Topics: Chemical process control, chemical dynamics, system stability, open loop transfer function, Bode plot, root locus plot, controller tuning, Ziegler-Nichols settings, Tyreus-Luyben settings, state space analysis, state equation, state-transition matric, state vector

POLYMER RHEOLOGY 1-2012,2015,2016,2017,2018,2019

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE411

Topics: Rheology, Maxwell element, Voight-Kelvin Element, Newtonian fluid, viscoelastic, shear

Strength of Materials

Year: 2022

School: Air Force Institute of Technology

Department: Engineering

Course Code: GET208

Topics: Strength of Materials, Stress, strain, stress transformation, torque, bending moments, shear stress, force, moment

Structural Analysis 1

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE326

Topics: Structural Analysis, support reaction, shear force, bending moment equation, slope curve, depletion curve, internal determinacy, external determinacy

Trial questions on strength of materials 1

Year: 2019

School: University of Nigeria, Nsukka

Department: Engineering

Course Code: CVE211

Topics: strength of materials, free body diagram, shear force, bending moment, beam, truss

Tests related to Design of Structural Elements

Physics (JAMB)

School: WAEC, JAMB & POST UTME

Department:

Course Code: JAMB

Topics: Physics, JAMB, Friction, work, force, motion, speed, velocity, energy, hydraulic press, relative density, hydrometer, gas law, sound wave, wave, light, mirror,capacitor, electricity, pressure